[Hai-users] Convert HMS program to HAI program

[Dudoussat, Scott A.]

There are significant differences between OmniPro and OmniPro II, so there will likely not be a way to automatically convert them.

When using Version 3.0, you will likely find new and better ways to accomplish your programs.  It is probably worth starting over to take advantage of the new features.

-Scott

-----Original Message-----
From: Doug Ringler [mailto:douglas.ringler at verizon.net]
Sent: Monday, January 19, 2009 5:03 PM
To: Doug Ringler; Dudoussat, Scott A.; schroeder at easternrad.com; hai-users at tssi.com
Subject: Re: [Hai-users] Convert HMS program to HAI program

For about 300 lines of program files, converting these manually from OmniPro
to OmniPro II is time consuming!

Doug
----- Original Message -----
From: "Doug Ringler" <douglas.ringler at verizon.net>
To: "Dudoussat, Scott A." <scott.dudoussat at homeauto.com>;
<schroeder at easternrad.com>; <hai-users at tssi.com>
Sent: Monday, January 19, 2009 6:01 PM
Subject: Re: [Hai-users] Convert HMS program to HAI program


> Scott,
>
> Any recommendations converting OmniPro to OmniPro II Program files?  Do we
> still need to convert these manually with PCAccess 3.0?  I did notice
> import/export commands but they are not pca file compatible.
>
> Doug
> ----- Original Message -----
> From: "Dudoussat, Scott A." <scott.dudoussat at homeauto.com>
> To: <schroeder at easternrad.com>; <hai-users at tssi.com>
> Sent: Monday, January 19, 2009 5:49 PM
> Subject: RE: [Hai-users] Convert HMS program to HAI program
>
>
>> At a minimum, after converting to HAI, you can connect to the controller
>> and upload the existing configuration and programming.
>>
>> In the near future, there will likely be an option to open an OnQ
>> controller file in HAI PC Access and save it as an HAI controller file.
>>
>> -Scott
>>
>> -----Original Message-----
>> From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
>> Behalf Of Bruce Schroeder
>> Sent: Monday, January 19, 2009 1:35 PM
>> To: hai-users at tssi.com
>> Subject: Re: [Hai-users] Convert HMS program to HAI program
>>
>>
>> That is what I expected.
>>
>> I will use this "opportunity" to clean up, reorganize and streamline the
>> code--not a bad idea every so often. Hopefully the new PC Access software
>> improvements will make program entry easier.
>>
>> I don't know how the files would be different but i would guess they
>> would
>> be fairly similar. I would think there could be a tranlation program
>> written to convert one to the other--especially with the HMS customers
>> now
>> being serviced through HAI.
>>
>> thanks
>> Bruce
>>> I went through the same thing about 2 years ago when I converted from a
>>> SimplySmartHome system to an OmniPro; in fact IIRC the f/w in the SSH
>>> was
>>> 2.16a.
>>>
>>> Unless things have changed since, you will need to manually move the
>>> configuration and programming.  It was quite tedious, not so much in
>>> doing
>>> it, but making sure it was complete/correct; When I was done, I went
>>> over
>>> the whole thing about 6 times to make sure it was right.
>>>
>>> sorry.....
>>>
>>> -----Original Message-----
>>>>From: Bruce Schroeder <schroeder at easternrad.com>
>>>>Sent: Jan 19, 2009 1:18 PM
>>>>To: hai-users at tssi.com
>>>>Subject: [Hai-users] Convert HMS program to HAI program
>>>>
>>>>I am about to make the switch from an HMS 1100 controller (fw 2.16a) to
>>>> an
>>>>HAI OPII (fw 3.0) controller.  Is there any way to import or convert the
>>>>existing HMS program so it can be used on the HAI panel or will I need
>>>>to
>>>>reenter it all from scratch?
>>>
>>>
>>> _______________________________________________
>>> HAI-users mailing list
>>> HAI-users at tssi.com
>>> http://romaine.tssi.com/mailman/listinfo/hai-users
>>>
>>
>>
>>
>>
>> This transmission is intended for the use of the entity or individual to
>> which
>> or whom it is addressed.  The transmission or any documents accompanying
>> the
>> transmission may contain confidential information.  If you are not the
>> intended
>> recipient, you are hereby notified that any disclosure, copying,
>> distribution,
>> or action taken in reliance on the contents of the transmission or the
>> documents is strictly prohibited. If you have received this confidential
>> transmission in error, please destroy it and any accompanying documents
>> and
>> notify the sender immediately.  Thank you.
>>
>> _______________________________________________
>> HAI-users mailing list
>> HAI-users at tssi.com
>> http://romaine.tssi.com/mailman/listinfo/hai-users
>>
>> _______________________________________________
>> HAI-users mailing list
>> HAI-users at tssi.com
>> http://romaine.tssi.com/mailman/listinfo/hai-users
>>
>