[Hai-users] Convert HMS program to HAI program

[Doug Ringler]

For about 300 lines of program files, converting these manually from OmniPro 
to OmniPro II is time consuming!

Doug
----- Original Message ----- 
From: "Doug Ringler" <douglas.ringler at verizon.net>
To: "Dudoussat, Scott A." <scott.dudoussat at homeauto.com>; 
<schroeder at easternrad.com>; <hai-users at tssi.com>
Sent: Monday, January 19, 2009 6:01 PM
Subject: Re: [Hai-users] Convert HMS program to HAI program


> Scott,
>
> Any recommendations converting OmniPro to OmniPro II Program files?  Do we 
> still need to convert these manually with PCAccess 3.0?  I did notice 
> import/export commands but they are not pca file compatible.
>
> Doug
> ----- Original Message ----- 
> From: "Dudoussat, Scott A." <scott.dudoussat at homeauto.com>
> To: <schroeder at easternrad.com>; <hai-users at tssi.com>
> Sent: Monday, January 19, 2009 5:49 PM
> Subject: RE: [Hai-users] Convert HMS program to HAI program
>
>
>> At a minimum, after converting to HAI, you can connect to the controller 
>> and upload the existing configuration and programming.
>>
>> In the near future, there will likely be an option to open an OnQ 
>> controller file in HAI PC Access and save it as an HAI controller file.
>>
>> -Scott
>>
>> -----Original Message-----
>> From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On 
>> Behalf Of Bruce Schroeder
>> Sent: Monday, January 19, 2009 1:35 PM
>> To: hai-users at tssi.com
>> Subject: Re: [Hai-users] Convert HMS program to HAI program
>>
>>
>> That is what I expected.
>>
>> I will use this "opportunity" to clean up, reorganize and streamline the
>> code--not a bad idea every so often. Hopefully the new PC Access software
>> improvements will make program entry easier.
>>
>> I don't know how the files would be different but i would guess they 
>> would
>> be fairly similar. I would think there could be a tranlation program
>> written to convert one to the other--especially with the HMS customers 
>> now
>> being serviced through HAI.
>>
>> thanks
>> Bruce
>>> I went through the same thing about 2 years ago when I converted from a
>>> SimplySmartHome system to an OmniPro; in fact IIRC the f/w in the SSH 
>>> was
>>> 2.16a.
>>>
>>> Unless things have changed since, you will need to manually move the
>>> configuration and programming.  It was quite tedious, not so much in 
>>> doing
>>> it, but making sure it was complete/correct; When I was done, I went 
>>> over
>>> the whole thing about 6 times to make sure it was right.
>>>
>>> sorry.....
>>>
>>> -----Original Message-----
>>>>From: Bruce Schroeder <schroeder at easternrad.com>
>>>>Sent: Jan 19, 2009 1:18 PM
>>>>To: hai-users at tssi.com
>>>>Subject: [Hai-users] Convert HMS program to HAI program
>>>>
>>>>I am about to make the switch from an HMS 1100 controller (fw 2.16a) to
>>>> an
>>>>HAI OPII (fw 3.0) controller.  Is there any way to import or convert the
>>>>existing HMS program so it can be used on the HAI panel or will I need 
>>>>to
>>>>reenter it all from scratch?
>>>
>>>
>>> _______________________________________________
>>> HAI-users mailing list
>>> HAI-users at tssi.com
>>> http://romaine.tssi.com/mailman/listinfo/hai-users
>>>
>>
>>
>>
>>
>> This transmission is intended for the use of the entity or individual to 
>> which
>> or whom it is addressed.  The transmission or any documents accompanying 
>> the
>> transmission may contain confidential information.  If you are not the 
>> intended
>> recipient, you are hereby notified that any disclosure, copying, 
>> distribution,
>> or action taken in reliance on the contents of the transmission or the
>> documents is strictly prohibited. If you have received this confidential
>> transmission in error, please destroy it and any accompanying documents 
>> and
>> notify the sender immediately.  Thank you.
>>
>> _______________________________________________
>> HAI-users mailing list
>> HAI-users at tssi.com
>> http://romaine.tssi.com/mailman/listinfo/hai-users
>>
>> _______________________________________________
>> HAI-users mailing list
>> HAI-users at tssi.com
>> http://romaine.tssi.com/mailman/listinfo/hai-users
>>
>