[Hai-users] Convert HMS program to HAI program

[Doug Ringler]

Scott,

Any recommendations converting OmniPro to OmniPro II Program files?  Do we 
still need to convert these manually with PCAccess 3.0?  I did notice 
import/export commands but they are not pca file compatible.

Doug
----- Original Message ----- 
From: "Dudoussat, Scott A." <scott.dudoussat at homeauto.com>
To: <schroeder at easternrad.com>; <hai-users at tssi.com>
Sent: Monday, January 19, 2009 5:49 PM
Subject: RE: [Hai-users] Convert HMS program to HAI program


> At a minimum, after converting to HAI, you can connect to the controller 
> and upload the existing configuration and programming.
>
> In the near future, there will likely be an option to open an OnQ 
> controller file in HAI PC Access and save it as an HAI controller file.
>
> -Scott
>
> -----Original Message-----
> From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On 
> Behalf Of Bruce Schroeder
> Sent: Monday, January 19, 2009 1:35 PM
> To: hai-users at tssi.com
> Subject: Re: [Hai-users] Convert HMS program to HAI program
>
>
> That is what I expected.
>
> I will use this "opportunity" to clean up, reorganize and streamline the
> code--not a bad idea every so often. Hopefully the new PC Access software
> improvements will make program entry easier.
>
> I don't know how the files would be different but i would guess they would
> be fairly similar. I would think there could be a tranlation program
> written to convert one to the other--especially with the HMS customers now
> being serviced through HAI.
>
> thanks
> Bruce
>> I went through the same thing about 2 years ago when I converted from a
>> SimplySmartHome system to an OmniPro; in fact IIRC the f/w in the SSH was
>> 2.16a.
>>
>> Unless things have changed since, you will need to manually move the
>> configuration and programming.  It was quite tedious, not so much in 
>> doing
>> it, but making sure it was complete/correct; When I was done, I went over
>> the whole thing about 6 times to make sure it was right.
>>
>> sorry.....
>>
>> -----Original Message-----
>>>From: Bruce Schroeder <schroeder at easternrad.com>
>>>Sent: Jan 19, 2009 1:18 PM
>>>To: hai-users at tssi.com
>>>Subject: [Hai-users] Convert HMS program to HAI program
>>>
>>>I am about to make the switch from an HMS 1100 controller (fw 2.16a) to
>>> an
>>>HAI OPII (fw 3.0) controller.  Is there any way to import or convert the
>>>existing HMS program so it can be used on the HAI panel or will I need to
>>>reenter it all from scratch?
>>
>>
>> _______________________________________________
>> HAI-users mailing list
>> HAI-users at tssi.com
>> http://romaine.tssi.com/mailman/listinfo/hai-users
>>
>
>
>
>
> This transmission is intended for the use of the entity or individual to 
> which
> or whom it is addressed.  The transmission or any documents accompanying 
> the
> transmission may contain confidential information.  If you are not the 
> intended
> recipient, you are hereby notified that any disclosure, copying, 
> distribution,
> or action taken in reliance on the contents of the transmission or the
> documents is strictly prohibited. If you have received this confidential
> transmission in error, please destroy it and any accompanying documents 
> and
> notify the sender immediately.  Thank you.
>
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>