[Hai-users] Upgrade RC-100 to RC-1000 (resubmitted with images removed)

[Frank Goodyear]

Having an issue with getting the RC-1000 to work properly.  Should be a
simple installation but I definitely overlooking something.

 

I'm changing from a RC-100 thermostat to a RC-1000.  The existing RC-100
works just fine.

 

I have a Carrier single stage heat pump, it uses only one 24 volt
transformer.

 

I remove the RC-100 and installed the RC-1000, connected wire, thermostat
lights up,  configured the RC-1000 for heat pump,   connection to HAI
functioning, fan turns on and off manually.  BUT when I select heat, the
compressor just clicks and doesn't start up.

 

Since there are only 5 wires, 2 for the 24 volt, 1 for the reversing valve,
1 for the fan, and one for the compressor relay should be a no brainer. The
jumper is on for using one 1 24 volt transformer.

 

I've have checked the settings in the RC-1000 and they are as per
instructions for heat pump.  

 

I have links to a photo of the RC-100 base and the RC-1000 base with the
wires connected.

 

www.cobrahouse.com/img/rc-100.jpg   www.cobrahouse.com/img/rc-1000.jpg

 

I switched back to the RC-100 and everything works fine.

 

Help!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://romaine.tssi.com/pipermail/hai-users/attachments/20120102/d99413c3/attachment.html>