[Hai-users] thermostat control problem

[Joseph Vossen]

Eric,

thanks for the info; other than what chip it is and where it is located (hopefully it is socketed on my board!) do you recall where you purchased it?


On Nov 13, 2009, at 9:18 AM, Eric Rosenquist wrote:

> I had a problem just like that 2 years ago - turned out that one of the small socketed chips on the main board that handles the thermostat communication was fried. I swapped it for a good one and everything started working again.
> 
> I don't remember the details as to which chip it was, but hopefully one of the folks from HAI can chime in with that info.
> 
> 2009/11/13 Joseph Vossen <jkv at vossen.org>
> I have an OmniPro in my home which was installed around 1998; it is running f/w 1.9.  I also have nine (9) thermostats (RC-80) and one (1) outdoor temperature sensor connected.
> 
> Last night I was looking at one of the thermostats and noticed that the outdoor temperature was not being displayed; this was true for all nine (9) thermostats.