[Hai-users] Convert HMS program to HAI program

[Bruce Schroeder]

That is what I expected.

I will use this "opportunity" to clean up, reorganize and streamline the
code--not a bad idea every so often. Hopefully the new PC Access software
improvements will make program entry easier.

I don't know how the files would be different but i would guess they would
be fairly similar. I would think there could be a tranlation program
written to convert one to the other--especially with the HMS customers now
being serviced through HAI.

thanks
Bruce
> I went through the same thing about 2 years ago when I converted from a
> SimplySmartHome system to an OmniPro; in fact IIRC the f/w in the SSH was
> 2.16a.
>
> Unless things have changed since, you will need to manually move the
> configuration and programming.  It was quite tedious, not so much in doing
> it, but making sure it was complete/correct; When I was done, I went over
> the whole thing about 6 times to make sure it was right.
>
> sorry.....
>
> -----Original Message-----
>>From: Bruce Schroeder <schroeder at easternrad.com>
>>Sent: Jan 19, 2009 1:18 PM
>>To: hai-users at tssi.com
>>Subject: [Hai-users] Convert HMS program to HAI program
>>
>>I am about to make the switch from an HMS 1100 controller (fw 2.16a) to
>> an
>>HAI OPII (fw 3.0) controller.  Is there any way to import or convert the
>>existing HMS program so it can be used on the HAI panel or will I need to
>>reenter it all from scratch?
>
>
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>




This transmission is intended for the use of the entity or individual to which
or whom it is addressed.  The transmission or any documents accompanying the
transmission may contain confidential information.  If you are not the intended
recipient, you are hereby notified that any disclosure, copying, distribution,
or action taken in reliance on the contents of the transmission or the
documents is strictly prohibited. If you have received this confidential
transmission in error, please destroy it and any accompanying documents and
notify the sender immediately.  Thank you.