[Hai-users] Convert HMS program to HAI program

[Joseph K. Vossen]

I went through the same thing about 2 years ago when I converted from a SimplySmartHome system to an OmniPro; in fact IIRC the f/w in the SSH was 2.16a.

Unless things have changed since, you will need to manually move the configuration and programming.  It was quite tedious, not so much in doing it, but making sure it was complete/correct; When I was done, I went over the whole thing about 6 times to make sure it was right.

sorry.....

-----Original Message-----
>From: Bruce Schroeder <schroeder at easternrad.com>
>Sent: Jan 19, 2009 1:18 PM
>To: hai-users at tssi.com
>Subject: [Hai-users] Convert HMS program to HAI program
>
>I am about to make the switch from an HMS 1100 controller (fw 2.16a) to an
>HAI OPII (fw 3.0) controller.  Is there any way to import or convert the
>existing HMS program so it can be used on the HAI panel or will I need to
>reenter it all from scratch?