[Hai-users] AC Power Off Detection

[Paul]

I`ve used this feature and hadn`t noticed the delay - although I haven`t
need momentary accuracy. Have you tried upgrading the firmware (it`s a long
shot I know)? Perhaps use a current sensor - I recall Xantech makes one.

 

Paul

 

From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Doug Ringler
Sent: December-19-09 10:19 AM
To: Doug Ringler; Dudoussat, Scott A.; HAI-users at tssi.com
Subject: Re: [Hai-users] AC Power Off Detection

 

Clarification:  The Detection of AC Power Off for the log command to work
still requires the AC Power to be off for at least 10 or 15 sec.  Is there a
way to detect momentary AC Power Off without the delay?

 

Thanks!

----- Original Message ----- 

From: Doug <mailto:douglas.ringler at verizon.net>  Ringler 

To: Dudoussat, Scott A. <mailto:scott.dudoussat at homeauto.com>  ;
HAI-users at tssi.com 

Sent: Saturday, December 19, 2009 9:38 AM

Subject: [Hai-users] AC Power Off Detection

 

Running OmniProII ver 3.0 in this location.  I realize that for the
communicator and log, the AC loss must be for at least 3 min.  But, in some
lines of programming, I need to detect ACPower Off for any momentary amount.
However, testing it with:  When AC Power Off, then Log Power Out---will not
work.  Am I missing something?  I could run a solenoid for this, but would
rather not.

 

Thanks

 

Doug Ringler

 


  _____  


_______________________________________________
HAI-users mailing list
HAI-users at tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.717 / Virus Database: 270.14.114/2574 - Release Date: 12/19/09
03:33:00

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20091219/1793229d/attachment.htm