[Hai-users] AC Power Off Detection

[Doug Ringler]

Clarification:  The Detection of AC Power Off for the log command to work still requires the AC Power to be off for at least 10 or 15 sec.  Is there a way to detect momentary AC Power Off without the delay?

Thanks!
  ----- Original Message ----- 
  From: Doug Ringler 
  To: Dudoussat, Scott A. ; HAI-users at tssi.com 
  Sent: Saturday, December 19, 2009 9:38 AM
  Subject: [Hai-users] AC Power Off Detection


  Running OmniProII ver 3.0 in this location.  I realize that for the communicator and log, the AC loss must be for at least 3 min.  But, in some lines of programming, I need to detect ACPower Off for any momentary amount.  However, testing it with:  When AC Power Off, then Log Power Out---will not work.  Am I missing something?  I could run a solenoid for this, but would rather not.

  Thanks

  Doug Ringler



------------------------------------------------------------------------------


  _______________________________________________
  HAI-users mailing list
  HAI-users at tssi.com
  http://romaine.tssi.com/mailman/listinfo/hai-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20091219/94d0e94b/attachment.htm