[Hai-users] Re: Setting up Areas (Doug Dutile)

Doug Dutile ddutile at comcast.net
Mon Dec 29 10:52:28 CST 2008


Yes, the zone trip, it logs on the console, if the area is set to "all on" 
all ligths come on etc.   So the area trips, but I just get no sounder.  The 
Internal Sound is defined for "all areas".

Thanks

----- Original Message ----- 
From: "Ken McLeod" <kmcleod at prodigy.net>
To: <hai-users at tssi.com>
Sent: Monday, December 29, 2008 8:45 AM
Subject: [Hai-users] Re: Setting up Areas (Doug Dutile)


> >
>> Thanks, both sounders are already set to all areas.
>>
>
> Does the keypad sounder beep and does it show "burglary alarm" within a 
> time after the zone is tripped?
>
> If not then some things to check would be under Setup:Installer:Zones  and 
> Setup:Installer:Zone Options,  particularly to see if cross-zoning was 
> inadvertently enabled for this zone.
> Another thing to look for would be an unusually long entry/exit delay.
>
> Ken McLeod
> Integrated Home Technologies
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users 



More information about the HAI-users mailing list