[Hai-users] Upgrading to UPB

[Ahmed Al-Saggaf]

As far as I understand, UPB needs a phase coupler, and that could be the problem.
  Someone can correct me.
  Ahmed Al-Saggaf.

Guy Wenzel <guy at oakguy.com> wrote:
        st1\:*{behavior:url(#default#ieooui) }                Gentlemen
  I am upgrading after three years to UPB.  Things have been good up till now.  I installed the new firmware, switches and PIM.  I can tell through web link that signals are going out since the PIM flashes red.  I set the switches to learn and go to the controller and do the 6 > 1 to discover the switch and it fails.  I set Serial port 3 to UPB.  House Code 1 to HLC Lighting through the controller keypad since my PC Access is end user 2.7 (ugh).  
   
  I got a UPB training pdf file from Worthington that explains setting up HLC lighting for the units.  That’s what I don’t understand.  How that connection works since I don’t have any keypads yet.  I did not add a coupler yet since I thought UPB did not need one but I should get something to recognize right?  I’m getting one on order now.
   
  Any ideas?
  Thanks
  -g

_______________________________________________
HAI-users mailing list
HAI-users at tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users


 
---------------------------------
No need to miss a message. Get email on-the-go 
with Yahoo! Mail for Mobile. Get started.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20070524/b5e0e16e/attachment.htm