[Hai-users] Krone LSA

[Rod]

The LSA-Plus is just a different type of connection block which has its own
insertion tool.

Most of us use 66 blocks or 110 today it's just another type used for
telephony or network connections.

A connection to the HAI equipment is still going to be screw terminal since
that's what is provided on the board.

You would take the HAI connections to a LSA-Plus terminal strip and then
terminate your cable connections on the LSA-Plus terminal strip.

I prefer to terminate the HAI cables directly to the screw terminals on the
HAI board. This reduces points of failure due to poor connections.

I do use 110 blocks for my telephony and network connections. You could
substitute the LSA-Plus for the 110 blocks but they are more expensive and I
don't see any advantage.

Hope this helps.


-----Original Message-----
From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Wijoyo Utomo
Sent: Thursday, February 15, 2007 4:43 AM
To: hai-users at tssi.com
Subject: [Hai-users] Krone LSA

Does anyone have any experience terminating cable using Krone LSA plus?
One friend suggested to use this kind of termination but personally I
have no idea how to do it. Googling for the picture of installation
(either HA or communication) of Krone LSA plus also gives no
satisfactory result.

Thanks in advance.

Rgds,
W. Utomo


_______________________________________________
HAI-users mailing list
HAI-users at tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.17.39/687 - Release Date: 2/14/2007
4:17 PM
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.17.39/687 - Release Date: 2/14/2007
4:17 PM