[Hai-users] Omni IIe and CPU/XA with Relays

[Pierre Metivier]

I have been using the Ocelot with an Aegis2000 then a 3000 for several 
years. I use the serial port for communications between both.. I use it 
mostly for the ocelots stored IR commands, and its relay outputs. I write 
code for ocelot that gets executed by an ASCII command from the Aegis, also 
some code that gets executed when an IR command is received and the ocelot 
sends an ASCII command to Aegis. Its a very versatile combination, but 
requires code for both.



Pierre Metivier
Automated Living Inc.
480-706-4387
www.AutomatedLivingInc.com
----- Original Message ----- 
From: "Byron Peebles" <ByronPeebles at ieee.org>
To: <hai-users at tssi.com>
Sent: Monday, February 20, 2006 9:45 AM
Subject: [Hai-users] Omni IIe and CPU/XA with Relays


> Is anyone using the ADICOM units with the Omni IIe?  Could you
> advise how happy you are with the combination and how you have
> things configured between the Omni IIe and the CPUXA?  Thanks!
>
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>