[Hai-users] Omni Pro II programming questions...

[Tom Marek]

I have a recalculating hot water pump that I want to turn off when the
alarm is set to VACATION or AWAY.  I installed an X10 appliance module
and everything works well except that the line I wrote shuts off the
pump whenever the alarm is set.  When the system is set to NITE or NITE
DELAY I want the pump to continue to run.  Line reads: "When ARM
VACATION: H2O HTR Pump OFF" and "When ARM AWAY: H2O HTR Pump OFF".  The
final line reads "When OFF: H2O Htr Pump ON".  Any ideas?
 
 
Omni Pro II (2.5e)
PC Access 2.4a
 
Tom Marek
Pannaway Technologies Inc.
(512) 695-0119
www.pannaway.com <http://www.pannaway.com/> 
Technical Support (877) PAN-NAWY  (726-6299)
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20060814/6f57f77f/attachment.htm