[Hai-users] Control Device Question

[Brett Griffin]

Just to be clear, and the disclaimer.  The application is against UL
approval.  UL does not approve this application because you could injure
someone by opening or closing a garage door without visually verifying
safety first.

 

You can control garage door openers simply.  You will want to use a 12v
relay in line with the output.  Create a button for open door and close
door; also create voices for the buttons for telephone use.

 

The programming is simple, when button 1(open) and door (magnetic sensor)
secure: relay 1 (connected to G.D. opener) on for 1 second.

When button 2 (close) and door not ready: relay 1 on for one second.

 

>From here use the buttons in your programming.  For example when you arm
night run button 2, etc.

 

 Brett Griffin, Home Technology Consultant 
Architechtronics, Inc.

www.architechtronics.com

  _____  

From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Darren and Jody Bzdel
Sent: Monday, September 05, 2005 8:05 PM
To: hai-users at tssi.com
Subject: [Hai-users] Control Device Question

 

Hi there:

 

I have an Omni II question that I was hoping someone could point me in the
right direction on.

 

I have a garage door contact magnetic sensor connected and working with my
Omni. I would like to be able to open / close the garage door via Omni. I
ran a cable from the Omni output zone (Zone 1 or unit 65) to the garage door
open contacts (works when switch is closed) on the door opener unit. I now
need to program the omni accordingly for me to be able to control it from
the console / phone. The installer and user manual are very vague on this
and was hoping I could get some assistance.

 

Thanks

 

Buzz

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20050906/8f8d4dfd/attachment.htm