[Hai-users] Strange OP2/X10 problem

[Andrew Comstock]

You actually need to use the programming when X-10 A1 on hall lights on.
You cannot name the X-10 buttons.  I once made the same mistake.


Andrew Comstock, P.Eng.
Cell Phone  : 519-854-9623
Alarmtech    : 519-434-3996


-----Original Message-----
From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com]On
Behalf Of Tom Lyons
Sent: June 15, 2005 8:46 AM
To: HAI-users at tssi.com
Subject: [Hai-users] Strange OP2/X10 problem


Got a little X10 mini-controller from RS to toy around
with.  I named an X10 unit on the OP2 "front" and
programmed thusly:  when front on, hall lights on.
Simple.

But, and there's always a but, when I press the
appropriate button on the controller, no lights.  If I
am looking at the unit status screen on PCAccess, I
see the unit called "front" go on when the controller
button is pressed.  The strange thing is that if I
turn "front" on manually through the command screen in
PCAccess, the lights come on.

So....why won't the program respond to the unit going
to an on state via X10, but will respond if the unit
gets turned on manually?



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

_______________________________________________
HAI-users mailing list
HAI-users at tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 14/06/05

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 14/06/05