[Hai-users] Why does my Omni II Pro dial out on arm/disarm?

[info2004]

This also depends on your reporting format - if you have it set to Contact ID, it will report whether you have it set to 0 or 1. I believe HAI is working on this.

Paul Whyte

> As mentioned, I had already set Report Open/Close to ZERO which is the
> equivalent of setting it to no.
> 
>  
> 
> Any other thoughts?
> 
>  
> 
> Paul
> 
>  
> 
> -----Original Message-----
> From: Brad [mailto:looney2ns at sigecom.net] 
> Sent: Sunday, June 05, 2005 3:17 PM
> To: 'pwasserman'; hai-users at tssi.com
> Subject: RE: [Hai-users] Why does my Omni II Pro dial out on arm/disarm?
> 
>  
> 
> You must set "Report Open/Close" to No.
> 
>  
> 
>   _____  
> 
> From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
> Behalf Of pwasserman
> Sent: Sunday, June 05, 2005 2:15 PM
> To: hai-users at tssi.com
> Subject: [Hai-users] Why does my Omni II Pro dial out on arm/disarm?
> 
> I have Report Open/Close set to ZERO. but *still*, as soon as my arming
> delay is finished, the Omni seizes my phone line and apparently calls > the
> station. 
> 
>  
> 
> Similarly, when I disarm, it does the same thing.
> 
>  
> 
> I tried setting Report Open/Close to ONE, but this only made it not wait > for
> the arming delay before dialing out.
> 
>  
> 
> Any thoughts?
> 
>  
> 
> Thanks!
> 
>  
> 
> Paul
> 
>  
> 
>