[Hai-users] RE: Power Operated Door lock

[Brad]

Or you could power it from one of Elks power supplies:  http://www.elkproducts.com/products/elk-p112_p124.htm
This would give you longer run time for the HAI during a power outage.

Yes, you would have to add relay's to the HAI outputs to control this. The HAI output would turn on the relay, and the relay in turn would close the circuit to power the door lock.

  ----- Original Message ----- 
  From: Dan Wright 
  To: hai-users at tssi.com 
  Sent: Saturday, July 30, 2005 6:28 PM
  Subject: RE: [Hai-users] RE: Power Operated Door lock


  The current draw from the lock most likely will exceed what the Omni can source from its on board supply.  Consider going to a double battery setup and power the lock via a relay from the battery controlled by the HAI output.
    -----Original Message-----
    From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com]On Behalf Of Doug Burton
    Sent: Saturday, July 30, 2005 5:15 PM
    To: hai-users at tssi.com
    Subject: [Hai-users] RE: Power Operated Door lock


     

    Hiya,

     

    Need some help with installing (wiring) a Electric door deadbolt.   

     

    Its 12 v fail safe lock.  The idea being when the alarm is set in way mode, the Deadbolt energizes and locks the closet door where the System is located, for extra protection against theft of other systems in the computer closet.

     

    Best I can figure out is this should be controlled via the outputs on the HAI board 1-8???  

     

    But then I'm a little lost.  Would also like to power the bolt from the HAI controller for extra reliability

     

    Any suggestions?

     

    Doug Burton

     

    Loan Officer

    First Financial Mortgage

    office: 310-478-0180

    cell:   323-828-3684

    fax:    310-943-2498

    email: dougburton at firstcapcorp.com

     



------------------------------------------------------------------------------


  _______________________________________________
  HAI-users mailing list
  HAI-users at tssi.com
  http://romaine.tssi.com/mailman/listinfo/hai-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20050730/587c3852/attachment-0001.htm