[Hai-users] 3 beeps at Aegis panel?

[Dan Barclay]

Mike,

Someone may have other info specific to Aegis, but I'll pass on what I know
about it happening with Omni Pro II.

Several of us had the same problem and discussed it here and on the
Worthington board.  In general "3 beeps" means the console is having comm.
Problems talking to the OP, so check your comm links.  It may be as simple
as having a loose connection that occurred when you connected your new
zones.

It also turns out that one of the OP versions would randomly cause the
console to 3beep.  I think it had to do with response to the comm, but I
really don't know the details.  I do know that there was an updated ROM to
fix that problem, and it did fix it.  It was the same release that included
UPB support as I recall.

Dan


> -----Original Message-----
> From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
> Behalf Of Mike Nolan
> Sent: Sunday, February 06, 2005 2:21 PM
> To: hai-users at romaine.tssi.com
> Subject: [Hai-users] 3 beeps at Aegis panel?
> 
> We recently had 3 zones added to our Aegis.  Since then every now and then
> we get 3 beeps from a station, just one at a time, and it isn't always
> the same one.  This is happening several times a day.
> 
> What's the problem here and how can I correct it?
> --
> Mike Nolan
> 
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users