[Hai-users] Speaking of system resets...

[David Moore]

 Speaking of system resets...

I came home to an open front gate and front garage - both of which are
hooked up through outputs to my OPII system.  Upon investigation, the
system had reset itself and in the process, apparently bouncing the
outputs causing the garage and gate to open.  Does anyone know how to
prevent the system from momentary contacting the outputs upon a reset?

David



-----Original Message-----
From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Joseph K. Vossen
Sent: Monday, August 15, 2005 6:23 PM
To: Robert Stratton
Cc: HAI-users at tssi.com
Subject: Re: [Hai-users] power loss/restoration question

that is probably what happened to me, I had a SYSTEM RESET in my log.
Anyone know how to prevent a report going to the monitoring station when
this happens?

On Sunday 14 August 2005 11:08 pm, you wrote:
> On Aug 14, 2005, at 17:10, Ken Schumm wrote:
> > This has been a big issue for us, since we lose power at least 
> > monthly and sometimes for a day or more at a time. Normally when it 
> > happens our monitoring company calls us and reports a power outage. 
> > They will not call the cops for an outage though. Did your 
> > monitoring company tell you
>  > exactly what code they received? This information was very helpful 
> for
> > us. The log should also record this information. Before, during, and

> > after the outage.
>
> I have power problems as well, but the only times my monitoring center

> has called were after receiving "SYSTEM RESET" messages. These occur 
> on power restoration after extended outages long enough to drain the 
> backup battery.

_______________________________________________
HAI-users mailing list
HAI-users at tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users