<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content=text/html;charset=iso-8859-1>
<STYLE></STYLE>
<META content="MSHTML 6.00.2900.3268" name=GENERATOR></HEAD>
<BODY id=MailContainerBody
style="PADDING-LEFT: 10px; FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #000000; BORDER-TOP-STYLE: none; PADDING-TOP: 15px; FONT-STYLE: normal; FONT-FAMILY: Verdana; BORDER-RIGHT-STYLE: none; BORDER-LEFT-STYLE: none; TEXT-DECORATION: none; BORDER-BOTTOM-STYLE: none"
bgColor=#ffffff leftMargin=0 topMargin=0 acc_role="text" CanvasTabStop="true"
name="Compose message area">
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>My 2 cents</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>I have found this problem in several customers homes and
changing the ALC switch was the fix in 90% of the cases and in 10% of cases
I changed the ALC board to fix the problem. If it is happening now to multiple
switches, it might well be the board.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV>Pierre Metivier<BR>Automated Living Inc.<BR>480-706-4387<BR><A
href="http://www.AutomatedLivingInc.com">www.AutomatedLivingInc.com</A></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=dan@butterfields.net href="mailto:dan@butterfields.net">Dan
Butterfield</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=HAI-users@tssi.com
href="mailto:HAI-users@tssi.com">HAI-users@tssi.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Cc:</B> <A title=Looney2ns@wowway.com
href="mailto:Looney2ns@wowway.com">Brad</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, March 20, 2008 11:36
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [Hai-users] Problem with ALC
lighting on OmniPro II</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial>I appreciate the troubleshooting suggestions,
Mark! I agree that a properly monitored and maintained X10 system can be
extremely reliable. My issues over the years with X10 relates more to
the reliability of the individual units (and I know that if you pay more for
higher end units, this is less of a problem), which in my experience have a
high failure rate (at least compared to a regular light switch!), as well as
the fragility of the X10 network. The configuration of electrical
devices (computers, UPS's, AV equipment, etc) regularly changes in my house,
and this often means I have subsequent X10 failures that I need to track down
offending changes, move or add filters, etc.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>So by no means do I want to imply that X10 is inherently
random or failure prone. However, I did have an impression that ALC
should be more of a "set it and forget it" kind of thing with less ongoing
troubleshooting needed, because of its dedicated isolated network. Thus
my statement! However, after my most recent experience, perhaps the
operable work here is DID, since apparently ALC is prone to its own set of
problems.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>I appreciate Tom's comment on possible heat issues
causing switches to turn off, since a few of my switches are definitely
crammed into their j-box enclosures. However, I am definitely having
spontaneous turn-on issues as well... I returned today from a one night
campout to find the ALC dining room light had turned on in our absence.
Poltergeists?</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>- Dan</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=mdhimes57@msn.com href="mailto:mdhimes57@msn.com">MARK HIMES</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=Looney2ns@wowway.com
href="mailto:Looney2ns@wowway.com">Brad</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Cc:</B> <A title=HAI-users@tssi.com
href="mailto:HAI-users@tssi.com">HAI-users@tssi.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, March 20, 2008 1:00
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [Hai-users] Problem with
ALC lighting on OmniPro II</DIV>
<DIV><BR></DIV><!--[gte IE 5]><?xml:namespace prefix="v" /><?xml:namespace prefix="o" /><![endif]-->
<DIV
style="FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Verdana">
<DIV>I was expressing his point about "<EM>I have definitely seen this kind
of behavior from </EM>
<DIV><EM>X-10 switches, <U>and kind of expect it
there."</U></EM></DIV>
<DIV> </DIV>
<DIV>His problem may not necessarily be an ALC "only" related
problems.</DIV>
<DIV> </DIV>
<DIV>I was also expressing troubleshooting techniques that have worked for
me</DIV>
<DIV>FOR MANY MANY years !</DIV>
<DIV> </DIV>
<DIV>And if I've learned anything in my 28 years of troubleshooting
computers </DIV>
<DIV>(mainframe, large minicomputers, and PC's), you need to isolate and
repair </DIV>
<DIV>ALL KNOW PROBLEMS FIRST - in order to get to the obscure problems,
</DIV>
<DIV>and/or fixing know problems has been highly effective in
"automatically" </DIV>
<DIV>resolving other intermittent problems.</DIV>
<DIV> </DIV>
<DIV> </DIV></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="FONT: 10pt arial"><B>From:</B> <A
title=mailto:Looney2ns@wowway.com
href="mailto:Looney2ns@wowway.com">Brad</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=mailto:HAI-users@tssi.com
href="mailto:HAI-users@tssi.com">HAI-users@tssi.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, March 19, 2008 2:20
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [Hai-users] Problem with
ALC lighting on OmniPro II</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial>I fail to see what a discussion about X-10 has to do
with ALC problems.</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=mailto:mdhimes57@msn.com href="mailto:mdhimes57@msn.com">MARK
HIMES</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=mailto:HAI-users@tssi.com
href="mailto:HAI-users@tssi.com">HAI-users@tssi.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, March 19, 2008
2:27 AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [Hai-users] Problem
with ALC lighting on OmniPro II</DIV>
<DIV><BR></DIV><!--[gte IE 5]><?xml:namespace prefix="v" /><?xml:namespace prefix="o" /><![endif]-->
<DIV>
<DIV> </DIV>
<DIV>That's really interesting. I have an Omni-Pro I, connected to a
Stargate</DIV>
<DIV>system via serial port, for many years. The Stargate and the Omni
both</DIV>
<DIV>have all (or most) of the X-10 addresses configured. In the case of
my</DIV>
<DIV>Omni (I), it only allows 1/2 of the whole X10 addressing range (128
addresses</DIV>
<DIV>instead of the full 256). I have about 220 X10 addresses configured
in Stargate,</DIV>
<DIV>So the Stargate has 99% of all these exclusively programmed for use
in the Stargate.</DIV>
<DIV>My Omni-P has about 8 X10 addresses that it will respond to but
NONE of the</DIV>
<DIV>X10 addresses are programmed to be transmitted by Omni. I
programmed the</DIV>
<DIV>Omni to allow commands to be SENT TO STARGATE
that (eventually) </DIV>
<DIV>trigger an X10 transmission FROM the Stargate. This is so that I
could </DIV>
<DIV>be sure I never had any X10 "collisions" from both of these devices
and kept </DIV>
<DIV>my programming sanity at a "sane" level.</DIV>
<DIV> </DIV>
<DIV>I have NEVER had random X10 devices go on/off as randomly as
your</DIV>
<DIV>experiencing. However, I have had on rare occasions 1 SINGLE
receiver/device</DIV>
<DIV>act up and using my Monterey X10 troubleshooter, found the bad
receiver</DIV>
<DIV>and/or device (1 address, 1 house code 1 number). On a couple of
rare conditions</DIV>
<DIV>I found a bunch of device addresses on the SAME house
code causing a lot of grief.</DIV>
<DIV>Again, some troubleshooting with the tool, turning off stuff, etc
and found that </DIV>
<DIV>one of my many 16-button consoles was transmitted random garbage
and</DIV>
<DIV>replaced it to get back to NORMAL. And a couple of
times, many years ago when</DIV>
<DIV>I was first programming the Stargate I discovered a
several "bugs" (all mine) in the </DIV>
<DIV>software. Some were easy and some were hard to find. but my
Stargate</DIV>
<DIV>X10 transmissions AND programming have been solid for many
years.</DIV>
<DIV> </DIV>
<DIV>SOOOOOOoooooo. You didn't say how many devices or house code</DIV>
<DIV>addresses you had, but make a list of all of them and make sure
that </DIV>
<DIV>some or ALL of them are truly random.</DIV>
<DIV> </DIV>
<DIV> If all or most all are on the same house
code, you might have another</DIV>
<DIV> transmitter somewhere acting up on that SAME
house code. </DIV>
<DIV> </DIV>
<DIV> If some of the single device addresses are
"ALWAYS" part of your </DIV>
<DIV> random problem and others are NEVER a problem,
you might have some</DIV>
<DIV> devices/receivers that are bad (receiver,
device, loose connections).</DIV>
<DIV> And you might also have an address transmitter
other than Omni (console)</DIV>
<DIV> or a single device, screwing all the other
devices on the same house</DIV>
<DIV> code) I.e. mixture of single device failures
along with 1 or more </DIV>
<DIV> transmitting device failures (Other than Omni).
Always keep in mind </DIV>
<DIV> how many devices that you use ARE ALSO an
X10 transmitter !!</DIV>
<DIV> </DIV>
<DIV> Are all the addresses (house codes and
device codes) that are part</DIV>
<DIV> of the random actions on the SAME PHASE of your
power lines ?</DIV>
<DIV> What do you use for a Phase coupler ? That
could be part of your</DIV>
<DIV> randomness problem.</DIV>
<DIV> </DIV>
<DIV>I noticed you said" <EM>I have definitely seen this kind of
behavior from </EM></DIV>
<DIV><EM>X-10 switches, <U>and kind of expect it there</U></EM>. I
EXPECT A NEAR <BR>PERFECT SYSTEM ! That begs the question "HOW LONG"
have you </DIV>
<DIV>been allowing this randomness to occur ....WITH OUT CHECKING </DIV>
<DIV>THEM OUT ????? THOROUGHLY ?????</DIV>
<DIV> </DIV>
<DIV>Now the biggie. I have an Omni (I) but I NEVER have
programmed</DIV>
<DIV>any X10 transmission activity into my Omni. MY reason is more
</DIV>
<DIV>simpler that just sanity. My Omni programming "capabilities" are
</DIV>
<DIV>hugely inferior to Stargate. I don't see that an OMNI
11 could have </DIV>
<DIV>THAT much difference than Omni I. Actually I upgraded mine to</DIV>
<DIV>an Aegis many years ago.</DIV>
<DIV> </DIV>
<DIV>So I suggest you FIRST make a LIST of all the addresses you
are using</DIV>
<DIV>and track down the ones that DO and the ones that DON'T act up.
</DIV>
<DIV>This may take a while (that's the nature of "random"), From
personal</DIV>
<DIV>experience over the many years, that is the best first step I
EVER</DIV>
<DIV>take. It allowed you me see the scope of a whole problem and
help</DIV>
<DIV>better isolate the next steps to take. That's part of
analyzing</DIV>
<DIV>the scope and nature of a "System" and its problems.</DIV>
<DIV> </DIV>
<DIV>So AFTER you determine ALL THE ADDRESS that DO randomly
operate</DIV>
<DIV>and all the ADDRESS THAT NEVER randomly operate, THEN you have
a</DIV>
<DIV>better chance if isolating ..... What do all the randomly acting
devices</DIV>
<DIV>have in common, (or if its easier, maybe ask what is common about
the</DIV>
<DIV>ones that NEVER act up) ?</DIV>
<DIV> </DIV>
<DIV>
<DIV>Now if you've truly proven there is no single X10 device bad, or
something</DIV>
<DIV>messing up a whole X10 house code of addresses and that EVERY
device</DIV>
<DIV>code you are using is acting up and both both phases are
experiencing</DIV>
<DIV>problems .... AND your program is truly bug free then I'd say</DIV>
<DIV>something goofy is going on with your Omni. If THAT happens,</DIV>
<DIV>try another KNOWN GOOD power adapter (tat supplies power to
your</DIV>
<DIV>Omni). Noisy or flakey power supplies are notorious for causing
</DIV>
<DIV>intermittent problems. But if that's the case, then ALL your
addresses should be affected.</DIV>
<DIV>Also consider that your X10 Power Line Interface (converts the Omni
10 </DIV>
<DIV>commands to/from the power line, (or loose connection, bad wire,
etc etc).</DIV>
<DIV> </DIV>
<DIV>The only thing I can truly testify is that I have had several
years</DIV>
<DIV>now with ABSOLUTELY NO X10 Ghosts. It took a few years of</DIV>
<DIV>troubleshooting to get the "marginal" or even solid failing devices
</DIV>
<DIV>off my complete system and cleaning up all software bugs and </DIV>
<DIV>an occasional wall-wart. That's 190+ single X10 device/address
units, </DIV>
<DIV>over 14 X-10 transmitting devices/consoles, most with 16
buttons</DIV>
<DIV>and 25 "virtual/indirect (mostly software)" X10 addresses .</DIV>
<DIV> </DIV>
<DIV> No
random here.</DIV>
<DIV> </DIV>
<DIV>Hope all this ranting gives you a some ideas ?!</DIV>
<DIV> </DIV>
<DIV>Mark</DIV>
<DIV> </DIV></DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="FONT: 10pt arial"><B>From:</B> <A
title=mailto:dan@butterfields.net
href="mailto:dan@butterfields.net">Dan Butterfield</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=mailto:hai-users@tssi.com href="mailto:hai-users@tssi.com">HAI
Users Group</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, March 18, 2008
12:38 PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [Hai-users] Problem with
ALC lighting on OmniPro II</DIV>
<DIV><BR></DIV>I recently added some ALC lights (wired via cat-5 to an
OmniPro II), and am <BR>experiencing some odd lighting behavior.
The lights will periodically <BR>spontaneously turn on or off
(primarily off). This happens when no other <BR>activity is
occurring in the OmniPro II (e.g. no one is turning lights on or
<BR>off, and no timed events are triggering), and is random and
unpredictable. <BR>It typically is the case of a light turning off
some minutes or hours after <BR>manually turning it on. It
occurs with different lights in the house, so <BR>doesn't seem to be
tied to one switch.<BR><BR>I am going to start trouble shooting this
by disconnecting different <BR>switches from the OmniPro II to see if
some switch is injecting commands <BR>into the system in some way,
although with the infrequent intermittent <BR>nature of the problem,
it'll be a long slow process of elimination. I have <BR>tried to
eliminate all programming that references lights, to try to take
<BR>some kind of programming error out of the equation. However,
has anyone <BR>ever encountered this kind of behavior before?
Could bad connections to the <BR>switches cause this? Is cat-5
sufficient for ALC signalling, or is it <BR>possibile I am picking up
some interference?<BR><BR>I have definately seen this kind of behavior
from X-10 switches, and kind of <BR>expect it there, but was surprised
to see it in an ALC system. I had hoped <BR>it would be more
reliable! I have a bunch more switches to install, but am
<BR>holding up because of this problem.
<BR><BR>_______________________________________________<BR>HAI-users
mailing list<BR><A title=mailto:HAI-users@tssi.com
href="mailto:HAI-users@tssi.com">HAI-users@tssi.com</A><BR><A
title=http://romaine.tssi.com/mailman/listinfo/hai-users
href="http://romaine.tssi.com/mailman/listinfo/hai-users">http://romaine.tssi.com/mailman/listinfo/hai-users</A><BR></BLOCKQUOTE></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>HAI-users
mailing
list<BR>HAI-users@tssi.com<BR>http://romaine.tssi.com/mailman/listinfo/hai-users<BR></BLOCKQUOTE>_______________________________________________<BR>HAI-users
mailing
list<BR>HAI-users@tssi.com<BR>http://romaine.tssi.com/mailman/listinfo/hai-users<BR></BLOCKQUOTE></DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>HAI-users mailing
list<BR>HAI-users@tssi.com<BR>http://romaine.tssi.com/mailman/listinfo/hai-users<BR></BLOCKQUOTE>
<P>
<HR>
<P></P>_______________________________________________<BR>HAI-users mailing
list<BR>HAI-users@tssi.com<BR>http://romaine.tssi.com/mailman/listinfo/hai-users<BR></BLOCKQUOTE></BODY></HTML>