[Hai-users] Anbody still out there?

Sat Aug 3 18:23:20 CDT 2024

Thanks guys. My friend did the first: changed out the magnetic switch. No joy. The other steps are beyond my understanding of electricity although I have the meters.

Scott: I live in Gilbert at Guadalupe and Greenfield.

From: Doug Ringler <doug at windledge.com> 
Sent: Saturday, August 3, 2024 2:13 PM
To: Scott Miller <phoneguy623 at msn.com>; Bradley Weech <bradweech at cox.net>; Ken Schumm <kwschumm at qsolv.com>; Daniel Barclay <Dan at barclaysoftware.com>
Cc: hai-users at tssi.com
Subject: RE: [Hai-users] Anbody still out there?

Yup, this is the best advice, along with Denis’.  Bottom line, it could be the magnetic switch in the door frame, the wiring, or the zone.  The tests outlined below is the way to go to find out.

Doug

______________________

Douglas J. Ringler, VMD

Windledge Farm

Belgian Draft and Quarter Horses

(207) 684-3208 (O)

(207) 860-0371 (C and text)

From: hai-users-bounces at tssi.com <mailto:hai-users-bounces at tssi.com>  <hai-users-bounces at tssi.com <mailto:hai-users-bounces at tssi.com> > On Behalf Of Scott Miller
Sent: Saturday, August 3, 2024 4:50 PM
To: Bradley Weech <bradweech at cox.net <mailto:bradweech at cox.net> >; 'Ken Schumm' <kwschumm at qsolv.com <mailto:kwschumm at qsolv.com> >; 'Daniel Barclay' <Dan at barclaysoftware.com <mailto:Dan at barclaysoftware.com> >
Cc: hai-users at tssi.com <mailto:hai-users at tssi.com> 
Subject: Re: [Hai-users] Anbody still out there?

What part of Arizona are you in?  

First, test the zone by shorting it out with 1k ohm resistor.   If the zone shows closed, then it's good.   

Test the wire by shorting out one side and using your ohm meter see if you see the short on the other side.  If the short is missing, it's defective wire.   

Lastly, check the contact by itself by hooking directly to it using your ohm meter.  If the contact responds, then the contact is good.   

I live in AZ and your right, it's hot! 

Hope this helps, 

Scott 

Get Outlook for Android <https://aka.ms/AAb9ysg> 

  _____  

From:  <mailto:hai-users-bounces at tssi.com> hai-users-bounces at tssi.com < <mailto:hai-users-bounces at tssi.com> hai-users-bounces at tssi.com> on behalf of Bradley Weech < <mailto:bradweech at cox.net> bradweech at cox.net>
Sent: Saturday, August 3, 2024 2:41:15 PM
To: 'Ken Schumm' < <mailto:kwschumm at qsolv.com> kwschumm at qsolv.com>; 'Daniel Barclay' < <mailto:Dan at barclaysoftware.com> Dan at barclaysoftware.com>
Cc:  <mailto:hai-users at tssi.com> hai-users at tssi.com < <mailto:hai-users at tssi.com> hai-users at tssi.com>
Subject: Re: [Hai-users] Anbody still out there? 

I’ve got a question for anyone that can help. We have a outside door sensor (magnet) that doesn’t work. A security friend of mine (retired) replaced the magnet, etc., but it still doesn’t work. He’s guessing  there is a problem in the wiring somewhere and we’ll have to tone it out (when it gets cooler – we’re in AZ – yet I have an attic you can walk in and the wires are all mounted at chest level). Anyway, And, I haven’t been able to find anyone locally that works on an Omni Pro II system. So, I was wondering if this sounds like a broken wire or something else? I can Bypass it at the keypads (which then shows as bypassed in the Installer software that I’ve had for years). And, I can Restore it at the keypads, which then changes it to Secure. But, ether  way in my copy of the installer software, it shows as secure. And, it doesn’t beep when you open the door. Any ideas from anyone? 

From: Ken Schumm < <mailto:kwschumm at qsolv.com> kwschumm at qsolv.com> 
Sent: Saturday, July 20, 2024 9:50 PM
To: Daniel Barclay < <mailto:Dan at barclaysoftware.com> Dan at barclaysoftware.com>
Cc: BRAD WEECH < <mailto:bradweech at cox.net> bradweech at cox.net>;  <mailto:hai-users at tssi.com> hai-users at tssi.com
Subject: Re: [Hai-users] Anbody still out there?

Whoops. I meant to say the buyer can pick it up locally. Thanks!

Ken

On Jul 20, 2024, at 8:57 PM, Daniel Barclay <Dan at barclaysoftware.com <mailto:Dan at barclaysoftware.com> > wrote:

 Good luck with the auction!  I clicked watch just because I’m curious how it goes.  

One comment, the listing says “local pickup only…” but from your description I don’t think you intended that.  I’m not sure how that works.  

Dan

Sent from my iPhone

On Jul 20, 2024, at 5:47 PM, Ken Schumm <kwschumm at qsolv.com <mailto:kwschumm at qsolv.com> > wrote:

I put all my OnQ/HAI and Misc stuff on an ebay auction starting at $1. Auction title is OnQ/HAI/Misc Home Automation Lot.

On Jul 18, 2024, at 6:32 AM, BRAD WEECH <bradweech at cox.net <mailto:bradweech at cox.net> > wrote:

I might need something you have as consumer for my home or neighbor is in the business of buying such.  

Sent from Brad's iPhone

On Jul 17, 2024, at 5:00 PM, Bill Johnston <hai at billyj.net <mailto:hai at billyj.net> > wrote:

Define what you want to take to the dump?  Might take off your hands.

Bill

On Wed, Jul 17, 2024, at 19:56, Ken Schumm wrote:

We built a new house and used Elk M1. Had an offer to work for Leviton but said screw that. Have a bunch of old HAI stuff that is queued for the dump. Sorry, can’t help with Crestron.

> On Jul 17, 2024, at 4:20 PM, Tony Golden <MrGolden at earthlink.net <mailto:MrGolden at earthlink.net> > wrote:

> 

> I'm still on the list, although I only have a few HAI systems left in the field, including my own.  

> 

> Sorry, I'm not very familiar with Vantage, outside of what's required to integrate it with Crestron - which isn't much :-)

> 

> 

>> --- On Wednesday, July 17, 2024 at 5:48 PM, Jim Brown wrote:

>> 

>> Cannot help with Vantage, but I did want to confirm that I received your

>> message and remain interested in the Aegis/OmniPro systems. I have two systems

>> still up and running.

>> 

>> Jim Brown

>> 

>> 

>>>> On Jul 17, 2024, at 4:19 PM, nolan at romaine.tssi.com <mailto:nolan at romaine.tssi.com>  wrote:

>>> 

>>> This list hasn't seen much traffic in months, is anybody still here?

>>> 

>>> If anyone who gets this works with Vantage systems, please contact me

>>> off-list.

>>> 

>>> Mike Nolan

>>> htfoot at gmail.com <mailto:htfoot at gmail.com> 

>>> 402-601-6557

> 

> 

> _______________________________________________

> HAI-users mailing list

> HAI-users at tssi.com <mailto:HAI-users at tssi.com> 

> http://romaine.tssi.com/mailman/listinfo/hai-users

_______________________________________________

HAI-users mailing list

HAI-users at tssi.com <mailto:HAI-users at tssi.com> 

http://romaine.tssi.com/mailman/listinfo/hai-users

_______________________________________________
HAI-users mailing list
HAI-users at tssi.com <mailto:HAI-users at tssi.com> 
http://romaine.tssi.com/mailman/listinfo/hai-users

_______________________________________________
HAI-users mailing list
HAI-users at tssi.com <mailto:HAI-users at tssi.com> 
http://romaine.tssi.com/mailman/listinfo/hai-users

_______________________________________________
HAI-users mailing list
HAI-users at tssi.com <mailto:HAI-users at tssi.com> 
http://romaine.tssi.com/mailman/listinfo/hai-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://romaine.tssi.com/pipermail/hai-users/attachments/20240803/3d8b0b12/attachment-0001.html>