[Hai-users] Omni II Clock adjustment

[Jim Marias]

Me too..  But mine was running fast!  Clocking down 10 seconds per month should work!

Dave, saying "in this day & age" is kind of useless when it comes to HAI, I'm afraid.  HAI was always a bit slow but very reliable.  Since Leviton bought them, it is now a dinosaur, I think.

Keeping mine running for core security but just moved to a linked Homeseer system for up to date home automation.  When the system eventually dies, I'll move to something else.  Sad and disappointing.

Jim



-----Original Message-----
From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On Behalf Of Dave Horoschak
Sent: Tuesday, March 14, 2017 9:01 PM
To: hai-users at romaine.tssi.com
Subject: Re: [Hai-users] Omni II Clock adjustment

Thanks.  That's a nice feature that I never knew about.

But in this day & age, wouldn't it make sense to have a feature where it sync'd to a NIST clock once a day over IP?
  - Dave


On 3/14/2017 7:10 PM, Mario Cassetti wrote:
> Hi Mike,
>
> I use Dealer PC Access 3.15 and the setting is located under the Setup 
> tab. There you will find "Miscellaneous Settings". Clicking on it will 
> give you a "Settings-Value" window where the "Clock Adjust" setting is 
> found.
>
> From the Installer Manual:
>
> CLOCK ADJUSTMENT
> If the clock on an OmniPro II is running faster or slower than the 
> actual time, you can have the OmniPro II automatically
> compensate up to 29 seconds per day. The OmniPro II will add or 
> subtract the selected amount of time daily.
>
> CLOCK ADJUSTMENT: 30
> 1-59=-29 TO +29 SEC/DAY
>
> Enter 1-29 to subtract 1-29 seconds. Enter 31-59 to add 1-29 seconds. 
> Enter 30 for no adjustment to the clock.
> The default setting is 30.
>
> Mario Cassetti
>
>
> ------------------------------------------------------------------------
> *De :* Mike Nolan <nolan at romaine.tssi.com>
> *À :* hai-users at romaine.tssi.com
> *Envoyé le :* mardi 14 mars 2017 18h11
> *Objet :* [Hai-users] Omni II Clock adjustment
>
> I thought there was a setting to adjust the clock on an Omni II
> if it runs a little fast or slow.  Mine is running about 5 seconds slow
> a day.
>
> I can't find the setting in the PC Access program, am I just not looking
> in the right place or am I wrong about there being such a setting?
> --
> Mike Nolan
>
>
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com <mailto:HAI-users at tssi.com>
> http://romaine.tssi.com/mailman/listinfo/hai-users
>
>
>
>
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users

_______________________________________________
HAI-users mailing list
HAI-users at tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users