[Hai-users] PC-Access from internet

Brad looney2ns at wowway.com
Sun May 23 17:39:53 CDT 2010


There isn't any gateway setup in the Omni.

--------------------------------------------------
From: "Wijoyo Utomo" <utomow at gmail.com>
Sent: Sunday, May 23, 2010 1:30 PM
To: "Denis Turpin" <moosediver at hotmail.com>
Cc: "Brad" <looney2ns at wowway.com>; <HAI-users at tssi.com>
Subject: Re: [Hai-users] PC-Access from internet

> Dennis,
> 
> this is certainly something I don't know. I've gone through the setup
> menus of my OP2, but I am pretty sure there is no menu entry for gateway
> setup on the Omni.
> 
> Could you be more specific about this gateway setup in the Omni please?
> It might be the key to my problem.
> 
> Thanks in advance,
> Jo
> 
> On Sun, 2010-05-23 at 14:17 -0400, Denis Turpin wrote:
>> Has the gateway been entered correctly in the Omni?
>> 
>> Denis Turpin
>> 
>> Sent from iPhone
>> 
>> On 2010-05-23, at 1:48 PM, Wijoyo Utomo <utomow at gmail.com> wrote:
>> 
>> > Hi Brad,
>> >
>> > yes, I forward external port 4369 to the internal port 4369 and the
>> > destination IP address is my Omni's IP address.
>> >
>> > Wijoyo
>> >
>> > On Sun, 2010-05-23 at 12:14 -0500, Brad wrote:
>> >> Did you double check that you forwarded the port to the Omni's IP  
>> >> address is
>> >> correct?
>> >>
>> >> --------------------------------------------------
>> >> From: "Wijoyo Utomo" <utomow at gmail.com>
>> >> Sent: Sunday, May 23, 2010 6:11 AM
>> >> To: <HAI-users at tssi.com>
>> >> Subject: [Hai-users] PC-Access from internet
>> >>
>> >>> All,
>> >>>
>> >>> I am trying to access my Omnipro II from the internet through a  
>> >>> router
>> >>> (Linksys WRT-120N). I have opened port 4369 via port forwarding  
>> >>> but it
>> >>> seems the OP-2 can not respond to the connection request (through  
>> >>> this
>> >>> port). For your information, I can connect to other devices in my  
>> >>> LAN
>> >>> from outside (printer, etc. etc.), so address resolution is not a
>> >>> problem here.
>> >>>
>> >>> If I try to connect from my local LAN using the address  
>> >>> 192.168.0.xxx, I
>> >>> can get connected to OP-2 that means my PC-Access setup is correct
>> >>> except when the address is changed to my domain name.
>> >>>
>> >>> Any advice/suggestion to solve my problem?
>> >>>
>> >>> Thanks in advance,
>> >>> Jo
>> >>>
>> >>> _______________________________________________
>> >>> HAI-users mailing list
>> >>> HAI-users at tssi.com
>> >>> http://romaine.tssi.com/mailman/listinfo/hai-users
>> >>>
>> >>
>> >
>> >
>> > _______________________________________________
>> > HAI-users mailing list
>> > HAI-users at tssi.com
>> > http://romaine.tssi.com/mailman/listinfo/hai-users
>> >
>> 
> 
> 
> 



More information about the HAI-users mailing list