From mousehunt at liunet.net  Thu Jul  8 11:15:04 2010
From: mousehunt at liunet.net (mousehunt@liunet.net)
Date: Thu Jul  8 11:15:42 2010
Subject: [Hai-users] Re-use HAI Aegis panel
In-Reply-To: <201001211000.o0LA06Mp007453@romaine.tssi.com>
References: <201001211000.o0LA06Mp007453@romaine.tssi.com>
Message-ID: <0L58006IOYH7L890@vms173015.mailsrvcs.net>

Folks,

I have a circa 2000 Aegis panel that I'd like to recycle.  I have two 
questions.

1.  Can it be used with the Omni keypads?
2.  Is there a firmware upgrade that converts it to an Omni?

Hope someone out there has the answer.

Cheers,
Al
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20100708/0b48a057/attachment.htm
From brett at architechtronics.com  Thu Jul  8 11:20:25 2010
From: brett at architechtronics.com (Brett Griffin)
Date: Thu Jul  8 11:21:04 2010
Subject: [Hai-users] Re-use HAI Aegis panel
In-Reply-To: <0L58006IOYH7L890@vms173015.mailsrvcs.net>
References: <201001211000.o0LA06Mp007453@romaine.tssi.com> 
	<0L58006IOYH7L890@vms173015.mailsrvcs.net>
Message-ID: <AANLkTil_9WIDxCK1vW40bMj1D25Oo8Kj04elhWK0MLwK@mail.gmail.com>

It has been a while but I believe if you call HAI there is a firmware chip
upgrade to convert it to work with HAI PC access.  It should work with the
HAI keypads and thermostats.  Again it has been 5 years since I did this, my
memory could be a little off.

--

*Brett Griffin**
**Check out out Home Automation Garage Sale: www.4homeiq.com!*

-------------------------------------------------------------------

On Thu, Jul 8, 2010 at 9:15 AM, <mousehunt@liunet.net> wrote:

>  Folks,
>
> I have a circa 2000 Aegis panel that I'd like to recycle.  I have two
> questions.
>
> 1.  Can it be used with the Omni keypads?
> 2.  Is there a firmware upgrade that converts it to an Omni?
>
> Hope someone out there has the answer.
>
> Cheers,
> Al
>
> _______________________________________________
> HAI-users mailing list
> HAI-users@tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20100708/b1732943/attachment.htm
From paul2007 at cybernetics.ca  Thu Jul  8 17:15:36 2010
From: paul2007 at cybernetics.ca (Paul)
Date: Thu Jul  8 17:15:40 2010
Subject: [Hai-users] Re-use HAI Aegis panel
In-Reply-To: <0L58006IOYH7L890@vms173015.mailsrvcs.net>
References: <201001211000.o0LA06Mp007453@romaine.tssi.com>
	<0L58006IOYH7L890@vms173015.mailsrvcs.net>
Message-ID: <sig.18050b650b.002601cb1eeb$17a24750$46e6d5f0$@ca>

Al;

 

If it was an Aegis 3000, you'd be in luck. You could simply upgrade the
firmware and re-write the code in PC Access. Since you have and Aegis 2000,
you may be able to send it into HAI to have them perform the upgrade. But
even if it were possible, you'd still have a board with no Ethernet. You may
even be able to find a refurbished Aegis board from some members on this
list.

 

If it were me, I'd just buy a new Omni 2e and have the flexibility to
upgrade the firmware anytime. Just rewrite the code you'll be up and running
with the same consoles, thermostats, sensors etc.

 

Just my 2c

 

Paul

 

From: hai-users-bounces@tssi.com [mailto:hai-users-bounces@tssi.com] On
Behalf Of mousehunt@liunet.net
Sent: July-08-10 12:15 PM
To: hai-users@tssi.com
Subject: [Hai-users] Re-use HAI Aegis panel

 

Folks,

I have a circa 2000 Aegis panel that I'd like to recycle.  I have two
questions.

1.  Can it be used with the Omni keypads?
2.  Is there a firmware upgrade that converts it to an Omni?

Hope someone out there has the answer.

Cheers,
Al

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.830 / Virus Database: 271.1.1/2989 - Release Date: 07/08/10
02:36:00

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20100708/c892c648/attachment.htm
