From davidson at pobox.com  Sat Jan 16 13:44:12 2010
From: davidson at pobox.com (Steven J. Davidson)
Date: Sat Jan 16 13:44:32 2010
Subject: [Hai-users] HAI RC-80 stuck on '27'
Message-ID: <000001ca96e4$47885f70$d6991e50$@com>

I woke up this morning and one of my four RC-80 thermostats, the one that
does heat only for a hydronic radiant floor in the master bath, was reading
'27' and the heat was off.

 

I've reset the 'stat and switched it to centigrade and back to Fahrenheit
and reset it again and it remains non-functioning (no change when a hair
dryer is trained on the thermostat).

 

Using dealer PC-Access Version 3.2 I see the thermostat reporting "User
Setting 20", all the other thermostats are reporting normally.  I am able to
connect to the thermostat from PC-Access and alter settings, but nothing I
do changes the reading of '27'.

 

I see that RC-80/RC-81 thermostats are no longer available; what would be
the replacement if I have to replace it?

 

Regards to the list./Steve

 

 

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20100116/3ae69a8f/attachment.htm
From dave at go-cybernet.com  Wed Jan 20 09:02:42 2010
From: dave at go-cybernet.com (David Ebaugh)
Date: Wed Jan 20 09:03:10 2010
Subject: [Hai-users] Re: HAI-users Digest, Vol 55, Issue 1
In-Reply-To: <201001171000.o0HA04Mq013308@romaine.tssi.com>
References: <201001171000.o0HA04Mq013308@romaine.tssi.com>
Message-ID: <e8db10171001200702o4279cc22p1f4412da80ea15c9@mail.gmail.com>

We had a problem similar to this with an RC-80BZ.  Tech support had us go
into installation, to the calibration menu. Then started clicking down until
we got to zero and kept going past it. It rolled over to the top of the
calibration numbers back to our normal setting.  This was a reset procedure
for some internal register. I don't remember if it was going down and past 0
or up and past 60 or whatever the value is, so you might want to try both.
Once we were out of programming mode, the it returned to normal operation.

Dave

On Sun, Jan 17, 2010 at 5:00 AM, <hai-users-request@tssi.com> wrote:

> Send HAI-users mailing list submissions to
>        hai-users@tssi.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://romaine.tssi.com/mailman/listinfo/hai-users
> or, via email, send a message with subject or body 'help' to
>        hai-users-request@tssi.com
>
> You can reach the person managing the list at
>        hai-users-owner@tssi.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of HAI-users digest..."
>
>
> Today's Topics:
>
>   1. HAI RC-80 stuck on '27' (Steven J. Davidson)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 16 Jan 2010 14:44:12 -0500
> From: "Steven J. Davidson" <davidson@pobox.com>
> Subject: [Hai-users] HAI RC-80 stuck on '27'
> To: <hai-users@tssi.com>
> Message-ID: <000001ca96e4$47885f70$d6991e50$@com>
> Content-Type: text/plain; charset="us-ascii"
>
> I woke up this morning and one of my four RC-80 thermostats, the one that
> does heat only for a hydronic radiant floor in the master bath, was reading
> '27' and the heat was off.
>
>
>
> I've reset the 'stat and switched it to centigrade and back to Fahrenheit
> and reset it again and it remains non-functioning (no change when a hair
> dryer is trained on the thermostat).
>
>
>
> Using dealer PC-Access Version 3.2 I see the thermostat reporting "User
> Setting 20", all the other thermostats are reporting normally.  I am able
> to
> connect to the thermostat from PC-Access and alter settings, but nothing I
> do changes the reading of '27'.
>
>
>
> I see that RC-80/RC-81 thermostats are no longer available; what would be
> the replacement if I have to replace it?
>
>
>
> Regards to the list./Steve
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://romaine.tssi.com/pipermail/hai-users/attachments/20100116/3ae69a8f/attachment-0001.htm
>
> ------------------------------
>
> _______________________________________________
> HAI-users mailing list
> HAI-users@tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>
>
> End of HAI-users Digest, Vol 55, Issue 1
> ****************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20100120/a10a5c5b/attachment.htm
