[Hai-users] Omni LT Wireless Zones

[Allen Edwards]

Hey Tony,

 

You are correct.  All three transmitters report as "Living Room Not Ready"
on the console.  Also, the receiver will show the transmitter number, but it
is mounted in the laundry room.   I was hoping to display the information on
the Console in the Master Bedroom.  

 

I did write some code to display a message when transmitter # 17 was not
ready, but that didn't work either.

 

The homeowner will know that any of the three windows could be open when the
"Living Room Not Ready" is shown on the console.

 

Thanks again,

Allen

 

From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Tony Golden
Sent: Saturday, July 18, 2009 10:59 PM
To: hai-users at tssi.com
Subject: RE: [Hai-users] Omni LT Wireless Zones

 

I don't think you can, the way you have it configured.  All three
transmitters will report as the same zone.  However, you should be able to
determine which one is open by looking at the receiver's LED display.

 

Tony Golden

Mobile Technology

Alpharetta, Georgia 

678-534-8511 office

918-261-6764 mobile

 

HAI Connectivity Partner

Crestron Consultant Uplink Partner

Crestron Certified Master Programmer

 

 

  _____  

From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Allen Edwards
Sent: Saturday, July 18, 2009 10:50 PM
To: hai-users at tssi.com
Subject: [Hai-users] Omni LT Wireless Zones

 

I have installed a 45A00-1 wireless 64 zone receiver on an Omni LT with 19
wireless zones.  Let's say the Omni LT zone 9 is the Living Room Windows
that will have three windows in total:

 

ZONE 9  - Living Room

Left Window              =          Trans # 1

Center Window          =          Trans # 17

Right Window            =          Trans # 33

 

The console does display "Living Room Not Ready", but how can I see which
window (left, center, or right) is Not Ready without many key strokes?

 

Thanks,

Allen Edwards

Automation East

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20090719/eda5d350/attachment.htm