[Hai-users] Omnipro II Calls

[Brad]

Hi Dan,

Only reason is because I probably did it that way once, and it
worked....so.....
:)

-----Original Message-----
From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Dan Barclay
Sent: Wednesday, June 11, 2008 1:34 PM
To: hai-users at tssi.com
Subject: RE: [Hai-users] Omnipro II Calls

Hi Brad,

I usually power down/up in a different order:

Disconnect transformer
Disconnect battery

Connect battery
Connect transformer.

Is there a reason you disconnect the battery first? I haven't seen any
problems doing it the way I do it, though it does generate a "power off"
event.

Thanks,
Dan

> -----Original Message-----
> From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
> Behalf Of Brad
> Sent: Wednesday, June 11, 2008 1:21 PM
> To: Edgar Silva; hai-users at tssi.com
> Cc: envia.nts at netvisao.pt
> Subject: Re: [Hai-users] Omnipro II Calls
> 
> Have you tried to power it down?
> Disconnect the battery, then disconnect the transformer, leave for 30
> min.
> then reconnect battery then transformer.
> Let me guess, you've had a thunderstorm lately?
> Hope this helps.
> 
> ----- Original Message -----
> From: "Edgar Silva" <edgar.nts at netvisao.pt>
> To: "'Brad'" <Looney2ns at wowway.com>; <hai-users at tssi.com>
> Cc: <envia.nts at netvisao.pt>; <envia.nts at netvisao.pt>
> Sent: Wednesday, June 11, 2008 1:11 PM
> Subject: RE: [Hai-users] Omnipro II Calls
> 
> 
> > Hi Brad,
> >
> > This Omni Board is installed for almost 3 years. Is has been working
> fine,
> > but since last night I'm unable to communicate from the outside :(
> >
> > And yes the problem is the same when calling from a cell phone or a
> land
> > line. I even tried voip, I called another job that we have and the
> omni
> > responds perfectly, but this one I'm unable to call it.
> >
> > Thanks and Cheers
> > Edgar
> >
> > -----Mensagem original-----
> > De: Brad [mailto:Looney2ns at wowway.com]
> > Enviada: quarta-feira, 11 de Junho de 2008 18:47
> > Para: Edgar Silva; hai-users at tssi.com
> > Cc: envia.nts at netvisao.pt
> > Assunto: Re: [Hai-users] Omnipro II Calls
> >
> > Has this worked correctly in the past?
> >
> > Does this problem occur when using both a cell phone and a landline
> phone?
> >
> >
> > ----- Original Message -----
> > From: "Edgar Silva" <edgar.nts at netvisao.pt>
> > To: <hai-users at tssi.com>
> > Cc: <envia.nts at netvisao.pt>
> > Sent: Wednesday, June 11, 2008 11:47 AM
> > Subject: [Hai-users] Omnipro II Calls
> >
> >
> >> Hi you all,
> >>
> >> I'm having a problem with my omni pro II.....
> >>
> >> I'm unable to call to the omni, I hear a beep and I start to insert
> the
> >> access code, then I hear a send beep and it hung up...
> >>
> >> I able to receive calls from the omni, I created a button that
> phones me
> >> and
> >> it phones.
> >>
> >> If I have a burglary alarm the omni calls.
> >>
> >> Has this happened to anyone?
> >>
> >> Anyway to solve this?
> >>
> >> Thanks and Cheers
> >> Edgar
> >>
> >
> >
> > ---------------------------------------------------------------------
> -------
> > ----
> >
> >
> >> _______________________________________________
> >> HAI-users mailing list
> >> HAI-users at tssi.com
> >> http://romaine.tssi.com/mailman/listinfo/hai-users
> >>
> >
> >
> 
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users

_______________________________________________
HAI-users mailing list
HAI-users at tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users