[Hai-users] RE: 1. Setting up Areas (Doug Dutile)

[Doug Dutile]

Thanks, both sounders are already set to all areas.

----- Original Message ----- 
From: "Ken McLeod" <kmcleod at prodigy.net>
To: <hai-users at tssi.com>
Sent: Sunday, December 28, 2008 8:22 AM
Subject: [Hai-users] RE: 1. Setting up Areas (Doug Dutile)


In PC Access, under Setup:Installer:Control:Output Types,
change the interior sounder or exterior sounder (or both) to "all areas"

Ken McLeod
Integrated Home Technologies


>Message: 1
>Date: Sat, 27 Dec 2008 18:42:51 -0500
>From: "Doug Dutile" <ddutile at comcast.net>
>Subject: [Hai-users] Setting up Areas
>To: <hai-users at tssi.com>
>Message-ID: <4DABDCA7270046DC81887BFD072C4A55 at dutile.net>
>Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>reply-type=original
>
>I have an OPII running 2.16a firmware.  I'm trying to set up an area to 
>keep
>my kids out of my workshop.  I've set this up as Area #2 and I'd like to 
>arm
>this area separately from the rest of the house.  My problem is that when
>that area trips, it will flash lights, but that is it.  It won't sound the
>sounder.  Area #1 still works when tripped, but Area #2 is silent.  It will
>flash the lights and log the event, so I know it's tripping, just not
>getting the sound. Any ideas?
>
>Thanks
>Doug



--------------------------------------------------------------------------------


> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>