[Hai-users] Keypad removal

[tomjacobsen at bellsouth.net]

The newer ones (the "blue" Keypads?) have the back of the KP bolted to the flushmount.  I just installed mine, and it appears that it was designed to have one corner of the KP slightly farther out from the frame so that you can pry the front of the KP off.  I was a bit worried about how to get it back out until I noticed this.

You are right about the press fit for the old ones ( "green" keypads)..They just pressure fit in .
> 
> From: "Brad" <Looney2ns at sigecom.net>
> Date: 2006/06/04 Sun PM 03:07:23 EDT
> To: "Dave Horoschak" <dth at comcast.net>,  <hai-users at tssi.com>
> Subject: Re: [Hai-users] Keypad removal
> 
> It just pulls out. It is simply held in by friction in the backbox.
> The white trim around the keypad is part of the back box. 
> 
> 
> ----- Original Message ----- 
> From: "Dave Horoschak" <dth at comcast.net>
> To: <hai-users at tssi.com>
> Sent: Sunday, June 04, 2006 12:02 PM
> Subject: [Hai-users] Keypad removal
> 
> 
> > Does anyone have LCD keypad removal instructions or the original 
> > installation instructions?  I'm replacing a flush mount LCD keypad with 
> > an OmniTouch screen but I don't have the removal instructions for the 
> > keypad.  Any assistance would be appreciated.
> >  - Dave
> > 
> > _______________________________________________
> > HAI-users mailing list
> > HAI-users at tssi.com
> > http://romaine.tssi.com/mailman/listinfo/hai-users
> 
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>