From dth at comcast.net  Sun Jun  4 12:02:43 2006
From: dth at comcast.net (Dave Horoschak)
Date: Sun Jun  4 12:02:51 2006
Subject: [Hai-users] Keypad removal
Message-ID: <44831233.4000603@comcast.net>

Does anyone have LCD keypad removal instructions or the original 
installation instructions?  I'm replacing a flush mount LCD keypad with 
an OmniTouch screen but I don't have the removal instructions for the 
keypad.  Any assistance would be appreciated.
  - Dave

From pcalleros at hotmail.com  Sun Jun  4 13:05:33 2006
From: pcalleros at hotmail.com (Pierre Calleros)
Date: Sun Jun  4 13:05:40 2006
Subject: [Hai-users] Keypad removal
In-Reply-To: <44831233.4000603@comcast.net>
Message-ID: <BAY101-DAV22940799949508472733FB6970@phx.gbl>

Dave,

I have never removed mine but remember it was tight and clipped into place.
U can try maybe multiple credit cards on all four sides and see if that
works.

PeteC 

-----Original Message-----
From: hai-users-bounces@tssi.com [mailto:hai-users-bounces@tssi.com] On
Behalf Of Dave Horoschak
Sent: Sunday, June 04, 2006 12:03 PM
To: hai-users@tssi.com
Subject: [Hai-users] Keypad removal

Does anyone have LCD keypad removal instructions or the original
installation instructions?  I'm replacing a flush mount LCD keypad with an
OmniTouch screen but I don't have the removal instructions for the keypad.
Any assistance would be appreciated.
  - Dave

_______________________________________________
HAI-users mailing list
HAI-users@tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users

From Looney2ns at sigecom.net  Sun Jun  4 14:07:23 2006
From: Looney2ns at sigecom.net (Brad)
Date: Sun Jun  4 14:08:15 2006
Subject: [Hai-users] Keypad removal
References: <44831233.4000603@comcast.net>
Message-ID: <000901c6880a$1c5830b0$6701a8c0@URAPutz>

It just pulls out. It is simply held in by friction in the backbox.
The white trim around the keypad is part of the back box. 


----- Original Message ----- 
From: "Dave Horoschak" <dth@comcast.net>
To: <hai-users@tssi.com>
Sent: Sunday, June 04, 2006 12:02 PM
Subject: [Hai-users] Keypad removal


> Does anyone have LCD keypad removal instructions or the original 
> installation instructions?  I'm replacing a flush mount LCD keypad with 
> an OmniTouch screen but I don't have the removal instructions for the 
> keypad.  Any assistance would be appreciated.
>  - Dave
> 
> _______________________________________________
> HAI-users mailing list
> HAI-users@tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users

From tomjacobsen at bellsouth.net  Mon Jun  5 08:37:35 2006
From: tomjacobsen at bellsouth.net (tomjacobsen@bellsouth.net)
Date: Mon Jun  5 08:37:55 2006
Subject: [Hai-users] Keypad removal
Message-ID: <20060605133735.ZQMK4103.ibm67aec.bellsouth.net@mail.bellsouth.net>

The newer ones (the "blue" Keypads?) have the back of the KP bolted to the flushmount.  I just installed mine, and it appears that it was designed to have one corner of the KP slightly farther out from the frame so that you can pry the front of the KP off.  I was a bit worried about how to get it back out until I noticed this.

You are right about the press fit for the old ones ( "green" keypads)..They just pressure fit in .
> 
> From: "Brad" <Looney2ns@sigecom.net>
> Date: 2006/06/04 Sun PM 03:07:23 EDT
> To: "Dave Horoschak" <dth@comcast.net>,  <hai-users@tssi.com>
> Subject: Re: [Hai-users] Keypad removal
> 
> It just pulls out. It is simply held in by friction in the backbox.
> The white trim around the keypad is part of the back box. 
> 
> 
> ----- Original Message ----- 
> From: "Dave Horoschak" <dth@comcast.net>
> To: <hai-users@tssi.com>
> Sent: Sunday, June 04, 2006 12:02 PM
> Subject: [Hai-users] Keypad removal
> 
> 
> > Does anyone have LCD keypad removal instructions or the original 
> > installation instructions?  I'm replacing a flush mount LCD keypad with 
> > an OmniTouch screen but I don't have the removal instructions for the 
> > keypad.  Any assistance would be appreciated.
> >  - Dave
> > 
> > _______________________________________________
> > HAI-users mailing list
> > HAI-users@tssi.com
> > http://romaine.tssi.com/mailman/listinfo/hai-users
> 
> _______________________________________________
> HAI-users mailing list
> HAI-users@tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
> 

From pcalleros at hotmail.com  Mon Jun  5 21:24:18 2006
From: pcalleros at hotmail.com (Pierre Calleros)
Date: Mon Jun  5 21:24:25 2006
Subject: [Hai-users] Keypad removal
In-Reply-To: <20060605133735.ZQMK4103.ibm67aec.bellsouth.net@mail.bellsouth.net>
Message-ID: <BAY101-DAV6E95AC5F4C1EC2D0F1F97B6950@phx.gbl>

I have a "blue" keypad which I remember press fitting into the housing.  
 

-----Original Message-----
From: hai-users-bounces@tssi.com [mailto:hai-users-bounces@tssi.com] On
Behalf Of tomjacobsen@bellsouth.net
Sent: Monday, June 05, 2006 8:38 AM
To: Brad; Dave Horoschak; hai-users@tssi.com
Subject: Re: Re: [Hai-users] Keypad removal

The newer ones (the "blue" Keypads?) have the back of the KP bolted to the
flushmount.  I just installed mine, and it appears that it was designed to
have one corner of the KP slightly farther out from the frame so that you
can pry the front of the KP off.  I was a bit worried about how to get it
back out until I noticed this.

You are right about the press fit for the old ones ( "green" keypads)..They
just pressure fit in .
> 
> From: "Brad" <Looney2ns@sigecom.net>
> Date: 2006/06/04 Sun PM 03:07:23 EDT
> To: "Dave Horoschak" <dth@comcast.net>,  <hai-users@tssi.com>
> Subject: Re: [Hai-users] Keypad removal
> 
> It just pulls out. It is simply held in by friction in the backbox.
> The white trim around the keypad is part of the back box. 
> 
> 
> ----- Original Message -----
> From: "Dave Horoschak" <dth@comcast.net>
> To: <hai-users@tssi.com>
> Sent: Sunday, June 04, 2006 12:02 PM
> Subject: [Hai-users] Keypad removal
> 
> 
> > Does anyone have LCD keypad removal instructions or the original 
> > installation instructions?  I'm replacing a flush mount LCD keypad 
> > with an OmniTouch screen but I don't have the removal instructions 
> > for the keypad.  Any assistance would be appreciated.
> >  - Dave
> > 
> > _______________________________________________
> > HAI-users mailing list
> > HAI-users@tssi.com
> > http://romaine.tssi.com/mailman/listinfo/hai-users
> 
> _______________________________________________
> HAI-users mailing list
> HAI-users@tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
> 

_______________________________________________
HAI-users mailing list
HAI-users@tssi.com
http://romaine.tssi.com/mailman/listinfo/hai-users

From utomow at telkom.net  Tue Jun  6 02:31:15 2006
From: utomow at telkom.net (Wijoyo Utomo)
Date: Tue Jun  6 02:31:31 2006
Subject: [Hai-users] Omni Pro II and PBX system
Message-ID: <000001c6893b$3215c0c0$0300a8c0@Bejo>

Hi,

I wonder how do I configure my Omni Pro II with my in house PBX so that
whenever I did not want to access OP from a remote phone, it will pass
the call to my CO line in the PBX so that I can dial any extension via
my PBX DISA.

>From what I experiece, whenever OP gives up the line (without me
entering/pressing any digit within 3 seconds) it also disconnect the
line (not passing to my PBX CO line).

Thanks in advance for any input.

Best Regards,
W. Utomo


From rapp at lmr.com  Tue Jun  6 08:15:18 2006
From: rapp at lmr.com (Larry)
Date: Tue Jun  6 08:15:41 2006
Subject: [Hai-users] Omni Pro II and PBX system
In-Reply-To: <000001c6893b$3215c0c0$0300a8c0@Bejo>
References: <000001c6893b$3215c0c0$0300a8c0@Bejo>
Message-ID: <ppva821tlgn09d8ur3cqgs1moikiv07o1e@4ax.com>

IIRC, the OP2 comes with an RJ31x.  You connect the CO to the RJ31x
and then to the PBX.  The OP2 will snatch the line (on-hook, then
off-hook) deliver the message and then return the line to the PBX)  I
have an OP2 wired that way to a Panasonic KX-TD1232.
--

Larry
Email to rapp at lmr dot com

On Tue, 6 Jun 2006 14:31:15 +0700, you wrote (with possible editing):

>Hi,
>
>I wonder how do I configure my Omni Pro II with my in house PBX so that
>whenever I did not want to access OP from a remote phone, it will pass
>the call to my CO line in the PBX so that I can dial any extension via
>my PBX DISA.
>
>>From what I experiece, whenever OP gives up the line (without me
>entering/pressing any digit within 3 seconds) it also disconnect the
>line (not passing to my PBX CO line).
>
>Thanks in advance for any input.
>
>Best Regards,
>W. Utomo
>
>
>_______________________________________________
>HAI-users mailing list
>HAI-users@tssi.com
>http://romaine.tssi.com/mailman/listinfo/hai-users

From utomow at telkom.net  Tue Jun  6 09:40:33 2006
From: utomow at telkom.net (Wijoyo Utomo)
Date: Tue Jun  6 09:42:09 2006
Subject: [Hai-users] Omni Pro II and PBX system
In-Reply-To: <ppva821tlgn09d8ur3cqgs1moikiv07o1e@4ax.com>
Message-ID: <000501c68977$2dce82e0$0300a8c0@Bejo>

Dear All,

My PBX system is pretty old and not from Panasonic Brand. It is the
Telenets 208E PBX system. Accessing DISA is pretty straight forward. If
I set a CO line to be DISA, then dialing into this line will be answered
by my recorded voice message which tell to press the number of desired
extension.

Larry, I have connected my OP exactly as the manual tells to (through an
RJ31X) and I have confirmed that OPII can seize the line whenever it
needs to dial out. Unfortunately, OPII can not force the PBX to receive
an off hook line, I guess it because the line no longer has the ring
pulse once it goes off hook by OP II.

Jean, my OP is not connected to a PBX extension, but to CO line via
RJ-31X. You got my problem clearly, I am trying to make OP to get the
line before the DISA message, but now I think that is impossible since
the line is already off-hook once OP takes it.

Byron, I think the Panasonic DISA is more advance with code dialing for
gaining access. Unfortunately, this Telenets can not be programmed that
way. The DISA features in this PBX is very straight forward with no code
to dial to access.

For now, I guess I have to live with the fact that if I want to access
OP, I have to dial in to a fax extension and wait until the fax gives up
the line and let the OP gets the line with the "PICK UP AFTER HANGUP"
feature, so after the PBX takes the line, not before.

If there is any other input, I also would like to know. For the answers
given so far, I'd thank you all for sharing your knowledges.

Best Regards,
W. Utomo

PS: BTW, what is really the use of Time Clock. Any idea how to use this
feature? Thx in advance

> -----Original Message-----
> From: hai-users-bounces@tssi.com 
> [mailto:hai-users-bounces@tssi.com] On Behalf Of Larry
> Sent: Tuesday, June 06, 2006 8:15 PM
> To: hai-users@tssi.com
> Subject: Re: [Hai-users] Omni Pro II and PBX system
> 
> 
> IIRC, the OP2 comes with an RJ31x.  You connect the CO to the 
> RJ31x and then to the PBX.  The OP2 will snatch the line 
> (on-hook, then
> off-hook) deliver the message and then return the line to the 
> PBX)  I have an OP2 wired that way to a Panasonic KX-TD1232.
> --
> 
> Larry
> Email to rapp at lmr dot com
> 
> On Tue, 6 Jun 2006 14:31:15 +0700, you wrote (with possible editing):
> 
> >Hi,
> >
> >I wonder how do I configure my Omni Pro II with my in house 
> PBX so that 
> >whenever I did not want to access OP from a remote phone, it 
> will pass 
> >the call to my CO line in the PBX so that I can dial any 
> extension via 
> >my PBX DISA.
> >
> >>From what I experiece, whenever OP gives up the line (without me
> >entering/pressing any digit within 3 seconds) it also disconnect the 
> >line (not passing to my PBX CO line).
> >
> >Thanks in advance for any input.
> >
> >Best Regards,
> >W. Utomo
> >
> >
> >_______________________________________________
> >HAI-users mailing list
> >HAI-users@tssi.com http://romaine.tssi.com/mailman/listinfo/hai-users
> 
> _______________________________________________
> HAI-users mailing list
> HAI-users@tssi.com http://romaine.tssi.com/mailman/listinfo/hai-users
> 


From schroeder at easternrad.com  Tue Jun  6 12:05:57 2006
From: schroeder at easternrad.com (schroeder@easternrad.com)
Date: Tue Jun  6 12:07:36 2006
Subject: [Hai-users] Omni Pro II and PBX system
In-Reply-To: <000501c68977$2dce82e0$0300a8c0@Bejo>
References: <ppva821tlgn09d8ur3cqgs1moikiv07o1e@4ax.com>
	<000501c68977$2dce82e0$0300a8c0@Bejo>
Message-ID: <2371.192.168.10.103.1149613557.squirrel@mail.easternrad.com>

This may not be the recommended solution but...

I have my OPII connected as an extension to a Panasonic PBX. If I want to
access it from outside I use the DISA feature which routes the call to the
OPII extension if the right number is pressed.  The limitation I see is
that it can't seize the telephone line when needed but since as an
extension I am pretty sure it will gain access to either available CO
line. This may be a safety risk [if both COs are in use during an
alarm--but pretty unlikely since we are either not home or will be off the
phone once the alarm sounds] to install for a client but may be good
enough if you are doing it for yourself.

Bruce
> Dear All,
>
> My PBX system is pretty old and not from Panasonic Brand. It is the
> Telenets 208E PBX system. Accessing DISA is pretty straight forward. If
> I set a CO line to be DISA, then dialing into this line will be answered
> by my recorded voice message which tell to press the number of desired
> extension.
>
> Larry, I have connected my OP exactly as the manual tells to (through an
> RJ31X) and I have confirmed that OPII can seize the line whenever it
> needs to dial out. Unfortunately, OPII can not force the PBX to receive
> an off hook line, I guess it because the line no longer has the ring
> pulse once it goes off hook by OP II.
>
> Jean, my OP is not connected to a PBX extension, but to CO line via
> RJ-31X. You got my problem clearly, I am trying to make OP to get the
> line before the DISA message, but now I think that is impossible since
> the line is already off-hook once OP takes it.
>
> Byron, I think the Panasonic DISA is more advance with code dialing for
> gaining access. Unfortunately, this Telenets can not be programmed that
> way. The DISA features in this PBX is very straight forward with no code
> to dial to access.
>
> For now, I guess I have to live with the fact that if I want to access
> OP, I have to dial in to a fax extension and wait until the fax gives up
> the line and let the OP gets the line with the "PICK UP AFTER HANGUP"
> feature, so after the PBX takes the line, not before.
>
> If there is any other input, I also would like to know. For the answers
> given so far, I'd thank you all for sharing your knowledges.
>
> Best Regards,
> W. Utomo
>
> PS: BTW, what is really the use of Time Clock. Any idea how to use this
> feature? Thx in advance
>
>> -----Original Message-----
>> From: hai-users-bounces@tssi.com
>> [mailto:hai-users-bounces@tssi.com] On Behalf Of Larry
>> Sent: Tuesday, June 06, 2006 8:15 PM
>> To: hai-users@tssi.com
>> Subject: Re: [Hai-users] Omni Pro II and PBX system
>>
>>
>> IIRC, the OP2 comes with an RJ31x.  You connect the CO to the
>> RJ31x and then to the PBX.  The OP2 will snatch the line
>> (on-hook, then
>> off-hook) deliver the message and then return the line to the
>> PBX)  I have an OP2 wired that way to a Panasonic KX-TD1232.
>> --
>>
>> Larry
>> Email to rapp at lmr dot com
>>
>> On Tue, 6 Jun 2006 14:31:15 +0700, you wrote (with possible editing):
>>
>> >Hi,
>> >
>> >I wonder how do I configure my Omni Pro II with my in house
>> PBX so that
>> >whenever I did not want to access OP from a remote phone, it
>> will pass
>> >the call to my CO line in the PBX so that I can dial any
>> extension via
>> >my PBX DISA.
>> >
>> >>From what I experiece, whenever OP gives up the line (without me
>> >entering/pressing any digit within 3 seconds) it also disconnect the
>> >line (not passing to my PBX CO line).
>> >
>> >Thanks in advance for any input.
>> >
>> >Best Regards,
>> >W. Utomo
>> >
>> >
>> >_______________________________________________
>> >HAI-users mailing list
>> >HAI-users@tssi.com http://romaine.tssi.com/mailman/listinfo/hai-users
>>
>> _______________________________________________
>> HAI-users mailing list
>> HAI-users@tssi.com http://romaine.tssi.com/mailman/listinfo/hai-users
>>
>
>
> _______________________________________________
> HAI-users mailing list
> HAI-users@tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users
>


From utomow at telkom.net  Wed Jun  7 22:03:27 2006
From: utomow at telkom.net (Wijoyo Utomo)
Date: Wed Jun  7 22:03:52 2006
Subject: [Hai-users] Digital Communicator
Message-ID: <000001c68aa8$20b9e3b0$0300a8c0@Bejo>

I've been searching on google to find information regarding how the
digital communicator works. What I want to know is how the communication
actually works, is it the same as pc modem, where to buy such receiving
end equipment and what software to use to be able to set up a monitoring
system.

What I got from google mostly are informations regarding monitoring
services itself, not the equipment.

Thanks in advance.

Rgds, W. Utomo


From looney2ns at sigecom.net  Fri Jun  9 15:38:41 2006
From: looney2ns at sigecom.net (Brad)
Date: Fri Jun  9 15:40:07 2006
Subject: [Hai-users] Web-Link II ver6025 email problems
Message-ID: <002301c68c04$b2d10b40$6d01a8c0@DELLOFFICE>

Skipped content of type multipart/alternative-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5675 bytes
Desc: not available
Url : http://romaine.tssi.com/pipermail/hai-users/attachments/20060609/4f35e94e/attachment.jpg
From schroeder at easternrad.com  Thu Jun 15 19:43:03 2006
From: schroeder at easternrad.com (Bruce Schroeder)
Date: Thu Jun 15 19:43:16 2006
Subject: [Hai-users] Random System Resets: Followup/Solution
Message-ID: <4491FE97.4010902@easternrad.com>

Just a final followup to complete the message archive for future reference:

System: HMS 1100 [same as Omni Pro II]
Problem:  Repeated system resets and data loss (voices) and loss of 
communication to Crestron via RS232 port.  Tried new power supplies, new 
serial cable, etc. Only happened when Crestron connected.
Solution: Scott D. from HAI was very helpful and said it was a firmware 
issue (was using v 2.8). Updated chip to newest release and problem solved.


Thanks to all who helped.

Bruce

From dth at comcast.net  Mon Jun 19 18:14:01 2006
From: dth at comcast.net (Dave Horoschak)
Date: Mon Jun 19 18:14:04 2006
Subject: [Hai-users] Russound integration questions
In-Reply-To: <000901c6880a$1c5830b0$6701a8c0@URAPutz>
References: <44831233.4000603@comcast.net>
	<000901c6880a$1c5830b0$6701a8c0@URAPutz>
Message-ID: <44972FB9.10109@comcast.net>

I have two questions regarding Russound integration with an OP2:

1. I've read that firmware 2.9 is required, but I see the Russound 
option in my serial port configuration settings for firmware 2.8.  Do I 
still need to upgrade?

2. Other than setting the serial port to control Russound, is there 
anything else I need to do, or does the OP2 automatically sync all of 
the required information?

Thanks.
  - Dave

