[Hai-users] Please help with FUSE TRBL NOW error message

[Paul Wasserman]

Brad,

Thanks for the advice. Removing the battery and powering down the OP2 for 10
minutes solved not only the fuse issue, but fixed the thermostats reading
zero degrees.

My sweltering family thanks you....

Paul

On 7/23/06, Brad <looney2ns at sigecom.net> wrote:
>
>  Temperature zones or thermostat zones?
>
>
>
> If thermostats, turn off the power to the affected furnace's. Wait 30
> minutes; turn power back on to see if the thermostats have cleared up.
>
> This has worked for me twice after thunderstorms.
>
>
>
> This also "possibly" could be an indication that your Omni Pro 2 system
> board is not properly grounded as per HAI instructions.
>
>
>
> I would also, in the Omni disconnect the battery(s), power down the boards
> AC power, wait 10 minutes, reconnect the batteries, then reconnect the AC
> power. See if that helps the fuse trouble.
>
>
>
> If it doesn't, you might want to do a system EPROM clear. This will *wipe
> out all programming*, so have some way of re-loading the programming in
> the Omni Pro.
>
> Good luck.
>  ------------------------------
>
> *From:* hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] *On
> Behalf Of *Paul Wasserman
> *Sent:* Sunday, July 23, 2006 2:56 PM
> *To:* hai-users at tssi.com
> *Subject:* [Hai-users] Please help with FUSE TRBL NOW error message
>
>
>
> This morning, we had an exrtremely rare and powerful electrical storm in
> Southern California.
>
> The first indication of trouble with my Omni II Pro was when my alarm
> monitoring company called to tell me they received a FUSE TRBL NOW message
> from my unit.
>
> A check of my panel shows the above mentioned message.  In addition, all
> three of my temperature zones now show ZERO degrees as the current
> temperature thus making it impossible to properly operate my much-needed air
> conditioner.
>
> Can someone help me out on how to approach this problem?  My wife is ready
> to kill me....
>
> Thanks!
>
> Paul
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20060724/ee519dc9/attachment.htm