[Hai-users] Haunted keypads?

[jmat]

I fixed the readability issue by mounting them higher up (at 5.75' from the
floor) -- I'm lucky in that everyone in my house is right around 6'.  :)

It's almost like they have the LCD's upside down -- you can read them very
easily from anywhere lower than the keypad -- but it's difficult to read
them from above.

J

On 9/6/05 8:43 PM, "Tony Golden" <MrGolden at earthlink.net> wrote:

> I was hoping HAI would show a "fixed" version of the blue keypads at CEDIA.
> I don't have a *single* customer with them, that hasn't complained about not
> being able to read the display...
> 
> 
> -----Original Message-----
> From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
> Behalf Of Brett Griffin
> Sent: Tuesday, September 06, 2005 7:36 PM
> To: 'jmat'; hai-users at tssi.com
> Subject: RE: [Hai-users] Haunted keypads?
> 
> Several years ago, when I was employed by HAI as a sales rep, I had seen
> this with the new blue console just once.  It was button 2, and it was a bad
> keypad.  You need to get an RMA when you can, which could be months.
> 
> I am not aware of anything that could cause this by bad wiring.  One way to
> test is connect the red and black wires of the keypad to the battery or a
> 12v source, if it continues it is a bad console.
> 
>  Brett Griffin, Home Technology Consultant
> Architechtronics, Inc.
> www.architechtronics.com
> 
> _______________________________________________
> HAI-users mailing list
> HAI-users at tssi.com
> http://romaine.tssi.com/mailman/listinfo/hai-users