[Hai-users] OMNI-RadioRa Integration

[Info | CSI]

The Lutron RadioRa RS-232 Interface module will allow your RadioRa to
communicate to the HAI via RS232. You shouldn't need another HAI serial
card, your Omni 2 already has an RS232 connector. This is of course
providing you have the latest and greatest firmware to support RA.

 

I hope everyone @ HAI in "Nawlins" is keeping dry!!! - our hearts go out to
ye-all!

 

Paul Whyte | CSI

  _____  

From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Brett Griffin
Sent: August 29, 2005 2:51 PM
To: 'Mauricio Galindo'; hai-users at tssi.com
Subject: RE: [Hai-users] OMNI-RadioRa Integration

 

Unless things have changed with the later firmware (I.E. 2.8-2.10), you need
the add-on serial board for Radio Ra.  

 

Brett Griffin, Home Technology Consultant 
Architechtronics, Inc.

www.architechtronics.com <http://www.architechtronics.com/> 

 

HomeTechDIY forums: www.hometechdiy.com <http://www.hometechdiy.com/> 

 

  _____  

From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Mauricio Galindo
Sent: Monday, August 29, 2005 1:01 PM
To: hai-users at tssi.com
Subject: [Hai-users] OMNI-RadioRa Integration

 

 

I want to install some Lutron Radio Ra Dimmers and want to integrate them
with my Omni II system.  In the firmware 2.7 release document, I found that
that I needed the Lutron RadioRa RS-232 Interface (RA-RS232) and a Serial
Interface Module for the Omni. Does anyone know if I can use the on-board
serial interface in my Omni, or is it necessary to add a serial module? 

            

Thanks for your help

 

Mauricio Galindo

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20050829/4aa21e51/attachment.htm