[Hai-users] OmniPro II with CorAccess

[David Ebaugh]

>From the Coraccess.com knowledge base which is fairly buried in their site:

 

"How do I reset the Companion 6 to defaults?

 

     The Companion 6 can be reset using the buttons on the right side. Press
and hold the buttons for 10 seconds for the desired function:

 

Buttons 1 & 2 Reboot

Buttons 3 & 4 Calibration

Buttons 4 & 5 Reset Network

Buttons 3 & 5 Reset device to factory defaults"

 

I have gotten looping problems in the past and a factory default may be your
only option if cycling power does not help.  Every time I have done a
factory default reset I have not seen any change in the software revision so
there should be no reason that you need to run software update again. So its
pseudo-factory reset. Since it doesn't take it EXACTLY back to the way you
got it, but it is more of a software reset with fail safe options. (aka very
little programs setup).

 

David Ebaugh

 

-----Original Message-----
From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com] On
Behalf Of Douglas McKalip
Sent: Wednesday, November 24, 2004 1:14 PM
To: hai-users at romaine.tssi.com
Subject: [Hai-users] OmniPro II with CorAccess

 

Hello all,

 

I have an OmniPro II with a CorAccess Companion 6. The house took a 

lightning strike and the Coraccess is a replacement unit. The Companion 

starts loading the data from the OmniPro and then gets into some sort of 

loop and I can see it loading things like the Sunrise-Sunset data over 

and over. The serial communication seems to be working both ways, but 

the data configuration never finishes.

 

I am thinking that the OmniPro maybe needs to get its memory and 

programs reset and reloaded, but I have not found a way to do that. 

Uploading the programming has not cleared the problem. The bios is 2.4 

and the Companion is 2.15 I think.

 

Any ideas?

 

Thanks in advance.

 

Doug

 

 

 

 

 

-- 

Douglas McKalip

 

Rex Service Company

Chicagoland's Premier Service Company

7030 W. 111th Street

Worth, IL 60482

 

708/448-5558        (Voice)

708/448-7396        (FAX)

800/HI REX TV       (800)

Mailto:doug at rexservice.com

 

_______________________________________________

HAI-users mailing list

HAI-users at tssi.com

http://romaine.tssi.com/mailman/listinfo/hai-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20041129/bb66f661/attachment.htm