[Hai-users] Any updates on the Temp/humid sensor problem

[Ray Manning]

I doubt it. As far as I know, HAI denies inaccuracy in the sensor itself and
claims any inaccurate readings are due to installation.

My personal experience comes close to what I've read on this group where my
readings are 3-4 *F high. I don't really have an accurate baseline
instrument to compare to however.  An interesting point I've observed
however is that the sensor seems to be accurate at around 32 *F so I'm not
even sure if it reads in a linear fashion.

I've moved mine several times to see if I could change the readings but I've
had no luck increasing accuracy. A low priority project on my list is to see
if it's possible to add back a calibrating pot to gain better accuracy or at
least obtain consistent readings with the rest of my sensors.

- Ray

 -----Original Message-----
From: hai-users-bounces at tssi.com [mailto:hai-users-bounces at tssi.com]On
Behalf Of Brad
Sent: Tuesday, November 23, 2004 9:34 AM
To: hai-users at romaine.tssi.com
Subject: [Hai-users] Any updates on the Temp/humid sensor problem


  Anyone heard if HAI ever solved the issue of the Temp/Humid sensor being
so inaccurate its un-useable?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://romaine.tssi.com/pipermail/hai-users/attachments/20041123/7fafb6d1/attachment.htm